Universal self-centering chuck KUS 80/3 M1, Kovonastroje
KUS 80/3 M1 |
In stock
(3x)
|
95,94 € with VAT |
KUS 80/3 M1 , HardLine |
In stock
(23x)
|
115,31 € with VAT |
KUS 100/3 M1 |
In stock
(12x)
|
98,94 € with VAT |
KUS 100/3 M1 , HardLine |
In stock
(11x)
|
122,22 € with VAT |
KUS 125/3 M1 |
In stock
(30x)
|
115,14 € with VAT |
KUS 125/3 M1 , HardLine |
In stock
(5x)
|
144,85 € with VAT |
KUS 160/3 M1 |
In stock
(31x)
|
134,08 € with VAT |
KUS 160/3 M1 , HardLine |
In stock
(16x)
|
178,06 € with VAT |
KUS 200/3 M1 |
In stock
(13x)
|
226,43 € with VAT |
KUS 200/3 M1 , HardLine |
In stock
(17x)
|
272,03 € with VAT |
KUS 250/3 M1 |
In stock
(14x)
|
255,56 € with VAT |
KUS 250/3 M1 , HardLine |
On request
|
304,23 € with VAT |
KUS 315/3 M1 |
In stock
(5x)
|
490,55 € with VAT |
KUS 400/3 M1 |
In stock
(8x)
|
744,44 € with VAT |
KUS 500/3 M1 |
In stock
(1x)
|
1.477,95 € with VAT |
KUS 630/3 M1 |
In stock
(2x)
|
3.740,24 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000310917
- Warranty:
- 24 months
- Code:
- KUS-080/3-M1
Product information
Accuracy, runout - see enclosed PDF
Additional sets of internal and external facepieces can be purchased - see related products.
Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse.
The chuck is supplied in a paper box with Czech instructions.
Variants
Accessories
-
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX
Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.
In stock40,33 € with VAT
Alternatives
-
Universal self-centering chuck TOS IUS 100 / 3-1 M1, ČSN 243801
IUS 100 / 3-1 M1 TOS Svitavy, TYPE 2438010103110 Three-chuck chuck, supplied in original box with set of inner and outer jaws and loop. Precision "1" - Precision universal, upper class, suitable for grinder ČSN 243801 / CSN 24 3801 Diameter: 100 Clamping range E3 - 39 mm < Clamping range F3 - 45 mm Clamping range G24 - 60 mm Clamping range H58 - 94 mm Clamping range J25 - 67 mm Clamping range L3 - 39 mm Clamping range N30 - 66 mm Clamping range O64 - 100 mm Clamping range P42 - 72 mm Clamping range R77 - 107 mm Clamping range S max.122 mm Clamping range Tmax 130 mm Clamping type M1 Accuracy class increased accuracy SUPERIOR Number of jaws 3 E H7 80 mm F ± 0,2 90 mm G 3xM6 mm H 41,5 mm J 17 mm K 8 mm L 85 mm N 58.4 mm O 18 mm R 23 mm S 3 mm T 52 mm U 46 mm
In stock282,93 € with VAT -
Universal self-centering chuck TOS IUS 100 / 3-2 M1, ČSN 243801
IUS 100 / 3-2 M1 TOS Svitavy, TYPE 2438010103210 Three-piece chuck, supplied in original box with set of inner and outer jaws and loop. Accuracy "2" - Common turning accuracy. ČSN 243801 / CSN 24 3801 Diameter: 100 Clamping range E3 - 39 mm Clamping range F3 - 45 mm Clamping range G24 - 60 mm Clamping range H58 - 94 mm Clamping range J25 - 67 mm Clamping range L3 - 39 mm Clamping range N30 - 66 mm Clamping range O64 - 100 mm Clamping range P42 - 72 mm Clamping range R77 - 107 mm Clamping range S max.122 mm Clamping range T max.130 mm Clamping type M1 Accuracy class standard accuracy Number jaws 3 E H7 80 mm F ± 0,2 90 mm G 3xM6 mm H 41,5 mm J 17 mm K 8 mm L 85 mm N 58.4 mm O 18 mm R 23 mm S 3 mm T 52 mm U 46 mm
In stock228,99 € with VAT -
Universal self-centering chuck ITEM 100/3 M1 HardLine, Kovonastroje
HardLine has locally grooved guide grooves for pinion mounting Diameter: 100 mm > Clamping: M1 Other Dimensions and Parameters - See Attached PDF Accuracy, Angling - See Attached PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.
In stock122,22 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!