Universal self-centering chuck ITEM 250/3 M1 HardLine, Kovonastroje
KUS 80/3 M1 |
In stock
(3x)
|
94,68 € with VAT |
KUS 80/3 M1 , HardLine |
In stock
(23x)
|
113,81 € with VAT |
KUS 100/3 M1 |
In stock
(14x)
|
97,65 € with VAT |
KUS 100/3 M1 , HardLine |
In stock
(11x)
|
120,64 € with VAT |
KUS 125/3 M1 |
In stock
(30x)
|
113,64 € with VAT |
KUS 125/3 M1 , HardLine |
In stock
(5x)
|
142,95 € with VAT |
KUS 160/3 M1 |
In stock
(31x)
|
132,33 € with VAT |
KUS 160/3 M1 , HardLine |
In stock
(16x)
|
175,74 € with VAT |
KUS 200/3 M1 |
In stock
(12x)
|
223,47 € with VAT |
KUS 200/3 M1 , HardLine |
In stock
(18x)
|
268,47 € with VAT |
KUS 250/3 M1 |
In stock
(14x)
|
252,22 € with VAT |
KUS 250/3 M1 , HardLine |
On request
|
300,26 € with VAT |
KUS 315/3 M1 |
In stock
(5x)
|
484,13 € with VAT |
KUS 400/3 M1 |
In stock
(8x)
|
734,71 € with VAT |
KUS 500/3 M1 |
In stock
(1x)
|
1.458,64 € with VAT |
KUS 630/3 M1 |
In stock
(2x)
|
3.691,40 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000326482
- Warranty:
- 24 months
- Code:
- KUS-250/3-M1-HL
Product information
Diameter: 250 mm
> Clamping: M1
Other Dimensions and Parameters - See Attached PDF
Accuracy, Angling - See Attached PDF
Additional sets of internal and external facepieces can be purchased - see related products.
Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse.
The chuck is supplied in a paper box with Czech instructions.
Variants
Accessories
-
Monoblock jaw MT 250/3 for self-centering universal chuck KUS, Kovonastroje
Set of monoblock jaws for universal PIECE 250/3 Designation: MT 250/3 The lower clamping part with gears is hardened, the top is me kkA1 - easily machinable. Jaws are not confused with jaws of other brands !!!
In stock88,37 € with VAT -
Soft split jaw SD 250/3 for self-centering universal chuck KUS, Metal tools
Set of soft split jaws for universal KUS 250/3 Designation: SD 250/3 The lower clamping part with toothing ( with combs) is hardened, the screwed tops can be machined - soft The jaws are not interchangeable with jaws of other brands!!!
In stock143,52 € with VAT -
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX
Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.
In stock39,80 € with VAT
Alternatives
-
Universal self-centering chuck TOS IUS 250 / 3-1 M1, ČSN 243801
IUS 250 / 3-1 M1 TOS Svitavy, TYPE 2438010253110 Three-piece chuck, supplied in original box with set of internal and external jaws and loop. Precision "1" - Precision universal, upper class, suitable for grinder ČSN 243801 / CSN 24 3801 Diameter: 250 Clamping range E5 - 107 mm < Clamping range F5 - 125 mm Clamping range G68 - 162 mm Clamping range H156 - 250 mm Clamping range J60 - 183 mm Clamping range K124 - 247 mm Clamping range L5 - 107 mm Clamping range N66 - 168 mm Clamping range O154 - 256 mm Clamping range P83 - 206 mm Clamping range R147 - 270 mm Clamping range S max.314 mm < br> Clamping range T max.328 mm Clamping type M1 Accuracy class increased accuracy SUPERIOR Number of jaws 3 E H7 210 mm F ± 0.2 226 mm G 3xM10 mm H 97,5 mm J 33 mm K 12 mm L 143,5 mm N 93,5 mm O 29,5 mm P 3x11 mm R 78 mm S 5 mm T 82 mm U 91 mm
In stock675,83 € with VAT -
Universal self-centering chuck TOS IUS 250 / 3-2 M1, ČSN 243801
IUS 250 / 3-2 M1 TOS Svitavy, TYPE 2438010253210 Three-jaw chuck, supplied in original box with set of inner and outer jaws and loop. Accuracy "2" - Common turning accuracy. ČSN 243801 / CSN 24 3801 Diameter: 250 Clamping range E5 - 107 mm Clamping range F5 - 125 mm Clamping range G68 - 162 mm Clamping range H156 - 250 mm Clamping range J60 - 183 mm Clamping range K124 - 247 mm Clamping range L5 - 107 mm Clamping range N66 - 168 mm Clamping range O154 - 256 mm Clamping range P83 - 206 mm Clamping range R147 - 270 mm Clamping range S max.314 mm Clamping range T max.328 mm Clamping type M1 Accuracy class standard accuracy Number of jaws 3 E H7 210 mm F ± 0.2 226 mm G 3xM10 mm H 97.5 mm J 33 mm K 12 mm L 143.5 mm N 93.5 mm O 29.5 mm P 3x11 mm R 78 mm S 5 mm T 82 mm U 91 mm
In stock607,35 € with VAT -
Universal self-centering chuck KUS 250/3 M3, Kovonastroje
Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 250 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see enclosed PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chassis is delivered in a wooden box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.
In stock279,07 € with VAT -
Universal self-centering chuck KUS 250/3 M1, Kovonastroje
Dimensions & Parameters - See enclosed PDF Accuracy, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.
In stock252,22 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!