Threaded turning knife SIR 0014 M16UB into the hole with internal cooling, Carmex
| 16mm (8,7mm)/ 08 IR |
On request
|
114,33 € with VAT |
| 20mm (11,5mm) / 16 IR |
In stock
(1x)
|
107,77 € with VAT |
| 20mm (12,5mm) / 16 IR |
In stock
(1x)
|
106,88 € with VAT |
| 20mm (13,5mm) / 16U IR/L |
On request
|
115,26 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000005353223
- Brand:
- CARMEX
- Warranty:
- 24 months
- Code:
- CX-SIR-0014-M16UB
Product information
Knife for internal thread turning, for threaded inserts, equivalent to SNR knife
Tap knife holder, for threaded inserts
Clamping diameter: 20 mm
For inserts marked: 16U IR/L
Height from the edge of the insert to the knife axis: 13.2mm
Diameter of the relieved part: 13.5mm
Length of the lightened part: 40mm
Total length of the knife: 150mm
Other dimensions - see catalog sheet
A key for changing the blade is supplied with the product
The construction of the holder is adapted for cutting trapezoidal threads - the holder does not have a support part for classic threaded blades with a "tip".
The holder is without a threaded plate - must be purchased additionally.
Carmex, Pramet, Iscar and other plates fit into the holder.
Variants
Accessories
-
Washer AI16 for threaded inserts 16EL and 16IR, Carmex
AI16 washer for threaded three-sided inserts Angle: 0° For Carmex external left and internal right threaded holders - bed size 16 - for threaded inserts 16IR/EL Suitable for Carmex holders only, compatibility with other brands cannot be guaranteed.
In stock11,29 € with VAT -
AI16-0 washer for 16EL and 16IR inserts, Carmex
AI16-0 washer for grooving / grooving three-sided inserts For Carmex external left and internal right threaded holders - bed size 16 - for 16IR/EL inserts If you want a threaded holder to fit with a grooving plate, you need to use this plate. Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock15,19 € with VAT -
Washer AI16( 2.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 2.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 3.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 3.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 0.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock15,15 € with VAT -
Washer AI16 (-1.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: -1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16 (-0.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: -0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 4.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 4.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!