Threaded turning knife SIR 0012 L16B ??for hole with internal cooling, Carmex
| 16mm (8,7mm)/ 08 IR |
On request
|
114,33 € with VAT |
| 20mm (11,5mm) / 16 IR |
In stock
(1x)
|
107,77 € with VAT |
| 20mm (12,5mm) / 16 IR |
In stock
(1x)
|
106,88 € with VAT |
| 20mm (13,5mm) / 16U IR/L |
On request
|
115,26 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 200011166748
- Brand:
- CARMEX
- Warranty:
- 24 months
- Code:
- CX-SIR-0012-L16B
Product information
Knife for internal thread turning —, for threaded inserts, knife equivalent SNR
Threaded knife holder, for threaded inserts
Clamping diameter: 20 mm
For holes with a diameter of Dmin = approx. 13.5-14mm - depending on the inserted plate
Height from the edge of the plate to the axis of the knife: 10.5mm
Diameter relieved single parts: 11,5mm
Lightweight length: 33mm
Total length of knife: 140mm
Other dimensions - see data sheet
Replacement blades are marked 16 NR TR or 16 IR TR
The key is supplied with the goods for the exchange of blades
The construction of the holder is adapted for cutting trapezoidal threads - the holder does not have a support part for classic threaded sheets with a "tip kou".
The holder is without a threaded plate - must be purchased.
Carmex, Pramet, Iscar and other plates fit in the holder.
Variants
Accessories
-
AI16-0 washer for 16EL and 16IR inserts, Carmex
AI16-0 washer for grooving / grooving three-sided inserts For Carmex external left and internal right threaded holders - bed size 16 - for 16IR/EL inserts If you want a threaded holder to fit with a grooving plate, you need to use this plate. Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock15,19 € with VAT -
Washer AI16 for threaded inserts 16EL and 16IR, Carmex
AI16 washer for threaded three-sided inserts Angle: 0° For Carmex external left and internal right threaded holders - bed size 16 - for threaded inserts 16IR/EL Suitable for Carmex holders only, compatibility with other brands cannot be guaranteed.
In stock11,29 € with VAT -
Washer AI16 (-0.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: -0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 4.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 4.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16 (-1.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: -1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 0.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock15,15 € with VAT -
Washer AI16( 3.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 3.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 2.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 2.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!