Threaded circular jaw NPTF 1/2 x 14 HSS-G 1:16, VOLKEL
| NPTF 1/8" x 27 |
On request
|
48,10 € with VAT |
| NPTF 1/4" x 18 |
On request
|
48,10 € with VAT |
| NPTF 3/8" x 18 |
On request
|
48,10 € with VAT |
| NPTF 1/2" x 14 |
On request
|
48,10 € with VAT |
| NPTF 3/4" x 14 |
On request
|
48,10 € with VAT |
| NPTF 1" x 11,5 |
On request
|
48,10 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 4022835980780
- Brand:
- VOLKEL
- Warranty:
- 24 months
- Code:
- 98078
Product information
Size: NPTF 1/2"
Pitch: 14 of strokes per inch, conical 1:16
Material: HSS - high-speed steel
Standard: ASME B1. 20.3
Usage: mild structural steels up to 500 N/mm2, automatic steels, structural steels and refined steels with a strength of up to 800 N/mm2, copper alloys, aluminum alloy
Adjustable design - by tightening the screws in the beam, it is possible to adjust the diameter of the resulting thread. If you do not stretch and tighten the screws in the beam only so that the jaw does not fall out of the beam, it works like an ordinary round jaw with a full profile.
Variants
Accessories
-
Taper machine tap NPT 1/8 x 27 HSSE 1:16 straight slot, VOLKEL
NPT 1/8 "- 27 without straight chuck chamfer with conical pitch NPT: American conical thread 1:16 Angle: 27 strokes per inch, basic Form : C (2-3 spiral threads) Material: HSSE (5% Cobalt Rapid Steel) Application: Steel with strength up to 900N / mm2
In stock31,15 € with VAT -
Short machine tap NPT 1/8 - 27 HSS with chip breaker, VOLKEL
Short NPT machine tap, straight slot with chip breaker, for conical pipe thread Size: 1/8" Pitch: 27 turns per inch Taper: 1: 16 Apical angle: 60° Form: B Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloy and low-alloy steels For manual and machine application For through holes
In stock21,07 € with VAT -
Short machine tap NPT 1/8 - 27 HSS spiral, VOLKEL
Short NPT machine tap, spiral, for conical pipe thread Size: 1/8" Pitch: 27 turns per inch Taper: 1:16 Apex angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloy steel For manual and machine application For blind holes
In stock28,63 € with VAT -
Short machine tap NPT 1/8 - 27 HSS, VOLKEL
Short NPT machine tap, straight groove, for conical pipe thread Size: 1/8" Pitch: 27 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes
On request15,92 € with VAT
Alternatives
-
Round thread die NPT 1/8 x 27 HSS 1:16, FANAR
Threaded eye with taper jaws NPT 1/8 "Pitch: 27 strokes per inch Taper 1:16 Standard: ANSI B-1.20.1, DIN24230 Material: HSS - high speed steel Application: mild structural steels up to 500 N / mm2, free-cutting steels, structural steels and heat-treated steels up to 800 N / mm2, copper alloys, alloyed aluminum
In stock22,61 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!