Professional pneumatic angle grinder 75mm GP-823AR3 for QRC discs, GISON
Product information
Speed: 15.000 rpm, adjustable
Drilling Diameter: 75mm
Included a QRC wheel carrier, a Velcro fastener can be purchased with this brush - see attached pictures.
Head angle: 100 °
Overall length: 180mm
Max. pressure: 6,2 bar (90PSI)
Air consumption: 0,49 m3 / min
Inlet fitting: 1/4 "
Minimum air hose diameter: 5mm
Noise level: 78dBA
Vibration: <2.5 m / sec2
The weight of the grinder itself: 0.7 kg
Each grinder has its CE number. of the drainage of the workpiece, the dust and the ground particles are not overly absorbed in the workpiece.
The drawing shows the declaration of conformity - according to the directive 2006/42 / EC and the standard EN 792-9.
Manufacturer GISON meets ISO-9001/2000 quality system certification
Pneumatic tools are recommended to be lubricated with the professional lubricant Mobil Velocite 6 - see related products.
Accessories
-
Velocite 6 oil for pneumatic tools - 1 liter, Mobile
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock10,93 € with VAT -
Velocite 6 oil for pneumatic tools - 5 liters, Mobile
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock47,43 € with VAT -
Velocite 6 oil for pneumatic tools - 0.5 liter, Mobile
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock6,56 € with VAT -
Velocite 6 oil for pneumatic tools - 100ml, Mobil
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock2,12 € with VAT -
Velocite 6 oil for pneumatic tools - 50ml, Mobil
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock1,31 € with VAT -
Velocite 6 oil for pneumatic tools - 200ml, Mobil
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock3,40 € with VAT -
Grinding wheel dia. 76mm QRC 411 Z80, KLINGSPOR
Exchangeable Speed ??Disc Disc with Quick Change Disc - QRC411 Diameter: 76mm Type of Clamping: QRC Grain: 80 Application: Aggressive Sanding of Standard and Stainless Steel thanks to the self-sharpening zircon corundum. High abrasion. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
On request1,34 € with VAT -
Grinding wheel dia. 76mm QRC 411 Z60, KLINGSPOR
Changeable Speed ??Disc Disc with Quick Change Disc - QRC411 Diameter: 76mm Clamp Type: QRC Grain Size: 60 Usage: Aggressive Sharpening of Standard and Stainless Steel thanks to the self-sharpening zircon corundum. High abrasion. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
In stock1,11 € with VAT -
Abrasive fleece dia. 76mm QRC 800 coarse, KLINGSPOR
Changing Disc with Quick Change Disc - QRC800 Brown Diameter: 76mm Type of Clamping: QRC Grain: Coarse (COARSE) Usage: Lightweight Discharge, removing rust and paint. Suitable for all types of metals, paint, varnish and putty. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
In stock2,63 € with VAT -
Abrasive fleece dia. 76mm QRC 800 medium thick, KLINGSPOR
Changeable Disc with Quick Change Disc - QRC800 Red Diameter: 76mm Type of Clamping: QRC Granularity: Medium (Medium) Usage: Lightweight Discharge, removing rust and paint. Suitable for all types of metals, paint, varnish and putty. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
In stock132,18 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!