NC hydraulic machine vice, type VMC, VERTEX
Recommended ✓
Variant:
| 100mm / VMC-100HV |
In stock
(5x)
|
871,05 € with VAT |
| 130mm / VMC-130HV |
In stock
(4x)
|
1.237,21 € with VAT |
| 160mm / VMC-160HV |
In stock
(4x)
|
1.382,03 € with VAT |
| 160mm / VMC-160HVL |
In stock
(2x)
|
1.196,56 € with VAT |
| 200mm / VMC-200HV |
In stock
(2x)
|
1.775,59 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- VERTEX
- Warranty:
- 24 months
Product information
Branded CNC machine vise with improved hydraulic transmission
Width of the jaws: according to the selected variant
Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants
There is a tightening scale (3 degrees) on the shaft near the booster.
Hydraulic transmission can be switched off and tightened manually without it. Just disconnect the nut - see the attached photo.
Compared to the VNC series of vices, the VMC type has higher rigidity, the bed is covered from above and from the handle - it prevents chips from getting inside.
Vise height guarantee.
The mechanism pulls the jaw down when tightening.
The screw is encapsulated -> protection against dust, chips and dirt.
The body is made of high-quality and highly resistant ductile cast iron FCD60
Bearing surface for workpiece hardened > 45 HRC.
Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm
Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm
Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm
Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)
Clamps (4 pcs), guide stones (2 pcs), handle are also part of the delivery.
Width of the jaws: according to the selected variant
Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants
There is a tightening scale (3 degrees) on the shaft near the booster.
Hydraulic transmission can be switched off and tightened manually without it. Just disconnect the nut - see the attached photo.
Compared to the VNC series of vices, the VMC type has higher rigidity, the bed is covered from above and from the handle - it prevents chips from getting inside.
Vise height guarantee.
The mechanism pulls the jaw down when tightening.
The screw is encapsulated -> protection against dust, chips and dirt.
The body is made of high-quality and highly resistant ductile cast iron FCD60
Bearing surface for workpiece hardened > 45 HRC.
Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm
Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm
Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm
Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)
Clamps (4 pcs), guide stones (2 pcs), handle are also part of the delivery.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou).
"Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou)."
Široký sortiment
Dobrá cena
Rychlá doprava
"DOPORUČUJI!"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!