Machine vice 200mm, jaw height 80mm, ČSN 243136

Machine vice with adjustable movable jaw, with extra long opening, with knurled jaws A „31SN 243136, with articulated crank Jaw width: 200mm Jaw height(per bed): 100mm Extension: 300mm(3 positions per 100mm) Standard: A „A’SN 243136 / 200/100 Guide stone guide: 14 H8 mm(can be made with another groove if necessary) Material: Body: ductile iron with min. tensile strength 400MPa - Jaws: steel 14220.4, hardness 56 2 HRC

Machine Vise with Hydraulic Pressure Jaw Clamping Mechanism Presses Clamped Workpiece Down - Jaws Do Not Rise !!! Jaw Width: 200mm Jaw Height: 63mm > Opening up to 310mm The opening is adjustable using a pin - up to 3 positions. Vise Length: 830 / 1140mm Maximum Hydraulic Pressure: 5000kgs - Adjustable. Accuracy up to 0,01mm Screw is encapsulated -> Protection against dust, splinters and dirt. Body made of high quality and durable cast iron. Viseer bed is hardened to 45 HRC Hydraulic oil

Brand CNC Machine Vice with Improved Hydraulic Gear Jaw Width: 200mm Jaw Height: 61mm Opening: 280mm Vibrations: 700mm Vibrations Height: 170mm Maximum Hydraulic Pressure: 58 kN (6000kgf) The Tightening Scale (3 Degrees) is attached to the power shaft. Hydraulic gear can be switched off and tightened manually without it. Just untie the nut - see attached photo. In contrast to the VNC VNC series, VMC has a higher stiffness, covered top and crank - prevents splinters from getting inside. Guarantee of the height of the vice. The mechanism stretches when tightening the jaw down. Screw is encapsulated -> dust, splinters and dirt protection. Body made of high-quality and highly resistant cast iron FCD60 Machining surface for workpiece hardened> 45 HRC. Parallelism of the bearing surface and the bottom of the vice: 0,01 mm / 100mm Rectangular contact area with jaw: 0,02 mm / 100mm Parallel with workpiece parallelepiped: 0,02 mm / 100mm < br> Hydraulic oil

Machine vice with adjustable movable jaw, with extra long opening, with knurled jaws A „31SN 243136, with articulated crank Jaw width: 200mm Jaw height(per bed): 60mm Extension: 300mm(3 positions per 100mm) Standard: A „A’SN 243136 / 200/60 Guide stone guide: 14 H8 mm(can be made with another groove if necessary) Material: Body: ductile iron with min. tensile strength 400MPa - Jaws: steel 14220.4, hardness 56 2 HRC

Branded machine vice with torque and hydraulic thrust. Jaw Width: 200mm Jaw Height: 62mm Opening up to 300mm Opening Adjustable with Pin in 3 Positions: Ranges: 0-100mm , 94-200mm, 194-300mm Vise Length: 680mm Vise Height Without Turntable: 170mm Maximum Hydraulic Pressure 5250kgs - Adjustable. Accuracy up to 0.02mm. Screw is encapsulated -> dust, splinters and dirt protection. Body made of high quality and durable cast iron. Hydraulic oil