Machine tap UNC - HSSE PM-FAN TiAlSiN 2B spiral (40 °), FANAR
| UNC 1/4" x 20 , DIN371 |
In stock
(1x)
|
34,40 € with VAT |
| UNC 3/8" x 16 , DIN371 |
In stock
(2x)
|
31,42 € with VAT |
| UNC 1/2" x 13 , DIN376 |
In stock
(2x)
|
37,41 € with VAT |
| UNC 5/8" x 11 , DIN376 |
In stock
(2x)
|
48,67 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- FANAR
- Warranty:
- 24 months
Product information
Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread
Matching: 2B
Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production)
Coating: TiAlSiN
Top thread angle: 60 °
Helix angle: 40 °
Thread lead: C, 2 turns - see attached photo
Ground thread profile
Standard: DIN 371, DIN376
Usage:
1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2
1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2
2.1: Ferritic and martensitic stainless steel up to 1000N / mm2
2.3: Heat-resistant stainless steel up to 1100N / mm2
3.3: Ball and malleable cast iron up to 700N / mm2
3.4: Ball and malleable cast iron up to 1000N / mm2
1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2
6.4: Bronze and aluminum up to 1200N / mm2
7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2
8.2: Thermosets and hardened plastics
Variants
Accessories
-
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
In stock15,66 € with VAT -
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
On request5,07 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!