Machine tap M20 HSSE PM S-NC TiCN ISO2(6HX) DIN376 spiral (45°), FANAR
| M3 DIN371 |
In stock
(8x)
|
14,10 € with VAT |
| M4 DIN371 |
In stock
(10x)
|
15,02 € with VAT |
| M5 DIN371 |
In stock
(7x)
|
15,34 € with VAT |
| M6 DIN371 |
In stock
(5x)
|
16,53 € with VAT |
| M8 DIN371 |
In stock
(7x)
|
18,90 € with VAT |
| M8x0,75 DIN371 |
On request
|
24,30 € with VAT |
| M10 DIN371 |
In stock
(3x)
|
24,76 € with VAT |
| M10x1,25 DIN371 |
On request
|
31,10 € with VAT |
| M10x1,0 DIN371 |
On request
|
28,35 € with VAT |
| M12 DIN376 |
In stock
(3x)
|
39,05 € with VAT |
| M12x1,5 DIN371 |
On request
|
39,72 € with VAT |
| M14 DIN376 |
In stock
(1x)
|
49,48 € with VAT |
| M16 DIN376 |
In stock
(1x)
|
53,53 € with VAT |
| M16x1,5 DIN371 |
On request
|
52,96 € with VAT |
| M18 DIN376 |
On request
|
72,85 € with VAT |
| M18x1,5 DIN371 |
On request
|
74,31 € with VAT |
| M20 DIN376 |
On request
|
79,17 € with VAT |
| M20x1,5 DIN371 |
On request
|
83,02 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000381115
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- D4-525301-0200
Product information
Ascent: 2,5, basic
Fitting: ISO2 / 6HX - grinding profile thread < br> Standard: DIN 376
Start thread: C, 2 courses - see attached photo
Material: HSSE-PM( Speed ??â € ‹â €‹ Cut steel 5% Cobalt, production baking)
Grinding profile thread
Coating: TiCN - Carbon Nitride Titanium
A… AAhel A… Ë ‡ roubovice: 45A ‚Â °
Use:
1.3 : Construction a carbon Â! Steel, low-alloyed steel, steel castings up to 1100N / mm2
1.4 : Alloyed steels, tool steel drawn for cold up to 1000N / mm2 < br> 2.1 : Ferritic and martensitic stainless steel steel up to 1000N / mm2
3.3 : Ball and tempered cast iron up to 700N / mm2
3.4 : Ball and tempered cast iron up to 1000N / mm2
1.1: Magnetic and mechanical structural steel up to 400M / mm2 < br> 1.2: Structural and automatic steel up to 500N / mm2
1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2
2.2: Austenitic steel up to 850N / mm2
2.3: Heat- resistant corrosion-resistant steel up to 1100N / mm2
4.4: M A „a its alloys up to 400N / mm2
4.5: Brass up to 600 N / mm2
4.7: Alloys aluminum a copper with long chip up to 800N / mm2
4.8: Alloys aluminum and zinc with long cutting up to 800N / mm2
6.3: Brass with long cutting up to 700N / mm2
7.2: Aluminum aluminum with contents leather Silica up to 5 %, up to 700N / mm2
7.3: Aluminum aluminum a lloys containing silicon from 5% to 10%, to 400N / mm2
This tap is intended for NC machines - synchronized cutting tapping
Variants
Accessories
-
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
In stock15,48 € with VAT -
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
On request5,01 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!