Machine tap M12x1.25 HSSE PM S-NC TiCN ISO2(6HX) DIN374 with chip breaker, FANAR
| M3 DIN371 |
In stock
(5x)
|
12,10 € with VAT |
| M4 DIN371 |
In stock
(3x)
|
12,25 € with VAT |
| M5 DIN371 |
In stock
(4x)
|
13,26 € with VAT |
| M6 DIN371 |
On request
|
13,73 € with VAT |
| M6x0,75 DIN371 |
In stock
(1x)
|
20,29 € with VAT |
| M8 DIN371 |
In stock
(5x)
|
16,50 € with VAT |
| M8x1,0 DIN371 |
On request
|
20,26 € with VAT |
| M8x0,75 DIN371 |
On request
|
21,38 € with VAT |
| M10 DIN371 |
In stock
(8x)
|
21,63 € with VAT |
| M10x1,25 DIN371 |
On request
|
27,87 € with VAT |
| M10x1,0 DIN371 |
On request
|
25,47 € with VAT |
| M8x1,0 DIN374 |
On request
|
24,64 € with VAT |
| M10 DIN376 |
On request
|
27,14 € with VAT |
| M10x1,25 DIN374 |
On request
|
30,44 € with VAT |
| M10x1,0 DIN374 |
On request
|
28,98 € with VAT |
| M12 DIN376 |
In stock
(2x)
|
32,43 € with VAT |
| M12x1,25 DIN374 |
On request
|
42,05 € with VAT |
| M12x1,0 DIN374 |
On request
|
37,41 € with VAT |
| M14 DIN376 |
In stock
(2x)
|
44,98 € with VAT |
| M16 DIN376 |
In stock
(1x)
|
50,07 € with VAT |
| M16x1,5 DIN374 |
On request
|
52,03 € with VAT |
| M18 DIN376 |
On request
|
63,04 € with VAT |
| M20 DIN376 |
On request
|
68,79 € with VAT |
| M22 DIN376 |
On request
|
97,86 € with VAT |
| M24 DIN376 |
On request
|
99,28 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000444735
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- D4-115301-0124
Product information
Gradient: 1,25 , fine
Facing: ISO2 / 6HX -
Standard: DIN 374
Thread start: B, 4 steps - see attached photo
Material: HSSE-PM (Cutting steel 5% Cobalt) > Coating: TiCN - Carbon Nitride Titanium
Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and malleable cast iron up to 700N / mm2
3.4 : Cast and rolled cast iron up to 1000N / mm2
1.1: Magnetic and soft structural steel up to 400M / mm2
1.2: Structural and automotive steel up to 500N / mm2
1.5: Heavy Steel to 38 HRC to 1200N / mm2
2.2: Austenitic Steel to 850N / mm2
2.3: Heat Resistant Corrosion Resistance to 1100N / mm2
4.4: Copper and Its Alloys Up to 400N / mm2
4.5: Brass up to 600 N / mm2
4.7: Aluminum and copper alloy with long chipping up to 800N / mm2
4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2
6.3: Brass with long chipping up to 700N / mm2
7.2: Aluminum alloy with silicon content up to 5%, up to 700N / mm2
7.3: Aluminum silicon alloy from 5% to 10%, up to 400N / mm2
This tap is designed for NC machines - synchronized thread cutting
Variants
Accessories
-
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
In stock5,07 € with VAT -
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
In stock15,66 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!