Lathe cutting knife 16x16x110mm left K10 ČSN 223713, DENAS
Variant:
| 10x10 P10 - for steel |
On request
|
5,53 € with VAT |
| 10x10 P20 - for steel |
On request
|
5,53 € with VAT |
| 10x10 P30 - for steel |
In stock
(3x)
|
5,53 € with VAT |
| 10x10 P45 - for steel |
On request
|
5,53 € with VAT |
| 10x10 K10 - for cast iron |
On request
|
5,53 € with VAT |
| 10x10 U10 - for INOX |
On request
|
5,53 € with VAT |
| 10x10 U30 - for INOX |
On request
|
5,53 € with VAT |
| 12x12 P10 - for steel |
On request
|
6,56 € with VAT |
| 12x12 P20 - for steel |
On request
|
6,56 € with VAT |
| 12x12 P30 - for steel |
On request
|
6,56 € with VAT |
| 12x12 P45 - for steel |
On request
|
6,56 € with VAT |
| 12x12 K10 - for cast iron |
On request
|
6,56 € with VAT |
| 12x12 U10 - for INOX |
On request
|
6,56 € with VAT |
| 12x12 U30 - for INOX |
On request
|
6,56 € with VAT |
| 16x16 P10 - for steel |
On request
|
7,54 € with VAT |
| 16x16 P20 - for steel |
On request
|
7,54 € with VAT |
| 16x16 P30 - for steel |
On request
|
7,54 € with VAT |
| 16x16 P45 - for steel |
In stock
(1x)
|
7,54 € with VAT |
| 16x16 K10 - for cast iron |
On request
|
7,54 € with VAT |
| 16x16 U10 - for INOX |
On request
|
7,94 € with VAT |
| 16x16 U30 - for INOX |
On request
|
7,54 € with VAT |
| 20x20 P10 - for steel |
On request
|
9,45 € with VAT |
| 20x20 P20 - for steel |
In stock
(3x)
|
9,45 € with VAT |
| 20x20 P30 - for steel |
On request
|
9,45 € with VAT |
| 20x20 P45 - for steel |
In stock
(5x)
|
9,45 € with VAT |
| 20x20 K05 - for cast iron |
On request
|
9,45 € with VAT |
| 20x20 K10 - for cast iron |
On request
|
9,45 € with VAT |
| 20x20 U10 - for INOX |
On request
|
9,45 € with VAT |
| 20x20 U30 - for INOX |
On request
|
9,45 € with VAT |
| 25x25 P10 - for steel |
On request
|
14,01 € with VAT |
| 25x25 P20 - for steel |
On request
|
14,01 € with VAT |
| 25x25 P30 - for steel |
On request
|
14,01 € with VAT |
| 25x25 P45 - for steel |
On request
|
14,01 € with VAT |
| 25x25 K10 - for cast iron |
On request
|
14,01 € with VAT |
| 25x25 U10 - for INOX |
On request
|
14,01 € with VAT |
| 25x25 U30 - for INOX |
On request
|
14,01 € with VAT |
| 32x32 P10 - for steel |
On request
|
20,57 € with VAT |
| 32x32 P20 - for steel |
On request
|
20,57 € with VAT |
| 32x32 P30 - for steel |
In stock
(5x)
|
20,57 € with VAT |
| 32x32 P45 - for steel |
On request
|
20,57 € with VAT |
| 32x32 K05 - for cast iron |
On request
|
20,57 € with VAT |
| 32x32 K10 - for cast iron |
On request
|
20,57 € with VAT |
| 32x32 U10 - for INOX |
On request
|
20,57 € with VAT |
| 32x32 U30 - for INOX |
On request
|
20,57 € with VAT |
| 40x40 K10 - for cast iron |
On request
|
64,84 € with VAT |
Current price:
7,54 €
with VAT
6,23 € without VAT
On request
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000488784
- Brand:
- DENAS
- Warranty:
- 24 months
- Code:
- 223713-16x16-K10-DN
Product information
Turning knife left-hand with brazed blade
Square: 16x16
Total length: 110mm
Carbide: H10 / K10-K15
Usage: for cast iron
Turning, drilling and reaming of gray cast iron, hardened cast iron, hardened steel, light and non-ferrous metals, wood and plastics. Machining at higher cutting speeds and small chip cross-sections. Very high wear resistance. Suitable for scraps with a dirty surface and an interrupted cut.
Standard: ČSN 223713 / CSN 22 3713 , DIN4972 , DIN4972L , ISO2
Caution - these soldered knives are semi-finished products - a suitable breaker must be sharpened before starting machining. If you don't have a place to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
Square: 16x16
Total length: 110mm
Carbide: H10 / K10-K15
Usage: for cast iron
Turning, drilling and reaming of gray cast iron, hardened cast iron, hardened steel, light and non-ferrous metals, wood and plastics. Machining at higher cutting speeds and small chip cross-sections. Very high wear resistance. Suitable for scraps with a dirty surface and an interrupted cut.
Standard: ČSN 223713 / CSN 22 3713 , DIN4972 , DIN4972L , ISO2
Caution - these soldered knives are semi-finished products - a suitable breaker must be sharpened before starting machining. If you don't have a place to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Rychlé vyřízení objednávky a dodání zboží.
"Doporučuji obchod."
Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou).
"Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou)."
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!