Picking, scooping, stroking

Product count: 13
  • Turning knife right-sided DIN 4972 R / CSN 223712

    Turning knife right-sided DIN 4972 R / CSN 223712
    Clearance sale

    Turning knife, right, with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223712 / CSN 22 3712, DIN4972, DIN4972R, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 3,33 € with VAT
  • Turning knife right-sided DIN 4972 R / CSN 223712 , DENAS

    Turning knife right-sided DIN 4972 R / CSN 223712 , DENAS

    Turning knife, right, with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223712 / CSN 22 3712, DIN4972, DIN4972R, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,41 € with VAT
  • Turning knife left-sided DIN 4972 L / CSN 223713

    Turning knife left-sided DIN 4972 L / CSN 223713
    Clearance sale

    Turning knife left with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223713 / CSN 22 3713, DIN4972, DIN4972L, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 2,55 € with VAT
  • Turning knife left-sided DIN 4972 L / CSN 223713 , DENAS

    Turning knife left-sided DIN 4972 L / CSN 223713 , DENAS

    Turning knife left with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223713 / CSN 22 3713, DIN4972, DIN4972L, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,41 € with VAT
  • Turning knife front-type DIN4976 / CSN 223718

    Turning knife front-type DIN4976 / CSN 223718
    Clearance sale

    Turning knife cutting front with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223718 / CSN 22 3718, DIN4976, ISO4 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 2,14 € with VAT
  • Turning knife front-type DIN4976 / CSN 223718 , DENAS

    Turning knife front-type DIN4976 / CSN 223718 , DENAS

    Turning knife cutting front with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223718 / CSN 22 3718, DIN4976, ISO4 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,64 € with VAT
  • Turning knife smoothing straight DIN 4975 / CSN 223720

    Turning knife smoothing straight DIN 4975 / CSN 223720
    Clearance sale

    Turning knife straight smoothing with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223720 / CSN 22 3720, DIN4975, DIN 4975R, ISO10 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 4,07 € with VAT
  • Turning knife smoothing straight DIN 4975 / CSN 223720 , DENAS

    Turning knife smoothing straight DIN 4975 / CSN 223720 , DENAS

    Turning knife straight smoothing with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223720 / CSN 22 3720, DIN4975, DIN 4975R, ISO10 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 6,03 € with VAT
  • Turning knife cutting dia. 15x100mm P20 CSN 223820 revolver

    Turning knife cutting dia. 15x100mm P20 CSN 223820 revolver

    Turret Lathe Cutter Ladle with Solder Sheet for Iron Diameter: 15mm Carbide: P20 / S20 - for turning steel Total length: 100mm Front with soldered blade Standard: ČSN 223820 / CSN 22 3820

    In stock
    2,87 € with VAT
  • Turning tool knife 12x12x80mm H10 CSN 223820

    Turning tool knife 12x12x80mm H10 CSN 223820

    Turret lathe cutter for cutting with solder blade for steel 12x12mm four edges: 12x12 Carbide: H10 / K10 - for turning cast iron Total Length: 80mm Front with soldered blade Standard: ČSN 223820 / CSN 22 3820

    In stock
    2,35 € with VAT
  • Lathe cutting knife 16x16x100mm H10 CSN 223820

    Lathe cutting knife 16x16x100mm H10 CSN 223820

    Turret lathe cutter for cutting with cast iron sheet 16x16mm four edges: 16x16 Carbide: K10 / H10 - for turning cast iron Total Length: 100mm Front with soldered blade Standard: ÄOSN 223820 / CSN 22 3820

    On request
    2,35 € with VAT
  • Turning turning knife 16x16x100mm P20 CSN 223820 turret

    Turning turning knife 16x16x100mm P20 CSN 223820 turret

    Turret lathe cutter for cutting with solder blade for iron 16x16mm four edges: 16x16 Carbide: P20 / S20 - for turning steel Total Length: 100mm Front with soldered blade Standard: ÄOSN 223820 / CSN 22 3820

    On request
    4,78 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Picking, scooping, stroking