Hard L jaw for fixed vice jaw VQC-125 and VQC-125H, VQC-125FJL

Machine hydraulic vice type MC with hydraulic booster, suitable for MC / NC machines Jaw width: 125mm Jaw height: 40mm Extension: 205mm Vise length: 479mm Vise height: 140mm Maximum pressure: 40 kN(4000kgf) The vice has 3 adjustable tightening steps(16kN, 28kN, 40kN) The screw is encapsulated -> protection of the screw against ingress of dust, Chips and dirt. Clamp height guarantee with a tolerance of 0.02 mm The mechanism pulls down when tightening the jaw. Body made of high-quality and highly resistant ductile iron FCD60 Bearing surface hardened> 45 HRC. Parallelism of the bearing surface and the bottom of the vice: 0.01 mm / 100 mm Perpendicularity of the bearing surface with the jaws: 0.02 mm / 100 mm with workpiece: 0.02 mm / 100 mm The delivery also includes clamps(4 pcs), guide stones(2 pcs), handle and transport eyes(2 pcs). It is possible to buy both soft and hard jaws for the vice - see the attached cat. sheet. Contact the Company: Hydraulic oil

Machine Vise Type MC with Mechanical Power Booster, Suitable for MC / NC Machines Jaw Width: 125mm Jaw Height: 40mm Opening: 205mm Vibrating Length: 452mm Vise height: 140mm Maximum thrust: 40 kN (4000kgf) Vise has 4 adjustable tightening stages (8kN, 16kN, 28kN, 40kN) Screw is encapsulated -> Protect the screw from dust, splinters and dirt. Guarantee of Vise Height in Tolerance 0.02mm Mechanism pulls down when tightening jaws. Body made of high-quality and highly resistant cast iron FCD60 Machining surface for workpiece hardened> 45 HRC. Parallelism of the bearing surface and the bottom of the vice: 0,01 mm / 100mm Rectangular contact area with jaw: 0,02 mm / 100mm Parallel with workpiece parallelepiped: 0,02 mm / 100mm < br> Also included are clamps (4pcs), guiding stones (2pcs), handle and transport eyes (2pcs). It is possible to buy soft and hard jaws for the vice - see the attached sheet. Ref. No. 4005-005