Forming tap M - HSSE-PM TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR
| M1,6 DIN371 |
In stock
(5x)
|
26,54 € with VAT |
| M2 DIN371 |
In stock
(10x)
|
25,99 € with VAT |
| M2,2 DIN371 |
On request
|
24,78 € with VAT |
| M2,5 DIN371 |
In stock
(8x)
|
24,30 € with VAT |
| M3 DIN371 |
In stock
(16x)
|
16,71 € with VAT |
| M3,5 DIN371 |
In stock
(5x)
|
24,24 € with VAT |
| M4 DIN371 |
In stock
(13x)
|
16,69 € with VAT |
| M4x0,5 DIN371 |
In stock
(5x)
|
27,08 € with VAT |
| M5 DIN371 |
In stock
(11x)
|
18,42 € with VAT |
| M5x0,5 DIN371 |
In stock
(5x)
|
34,34 € with VAT |
| M6 DIN371 |
In stock
(4x)
|
19,81 € with VAT |
| M6x0,75 DIN371 |
On request
|
28,94 € with VAT |
| M6x0,5 DIN371 |
In stock
(5x)
|
37,99 € with VAT |
| M7 DIN371 |
In stock
(5x)
|
29,43 € with VAT |
| M8 DIN371 |
On request
|
24,05 € with VAT |
| M8x1,0 DIN371 |
In stock
(8x)
|
25,86 € with VAT |
| M9 DIN371 |
In stock
(5x)
|
31,10 € with VAT |
| M10 DIN371 |
In stock
(6x)
|
28,93 € with VAT |
| M10x1,25 DIN371 |
In stock
(6x)
|
43,29 € with VAT |
| M10x1,0 DIN371 |
In stock
(8x)
|
43,29 € with VAT |
| M6 DIN376 |
On request
|
21,10 € with VAT |
| M7x1,25 DIN374 |
On request
|
13,32 € with VAT |
| M8 DIN376 |
On request
|
27,07 € with VAT |
| M8x1,0 DIN374 |
In stock
(20x)
|
31,36 € with VAT |
| M10 DIN376 |
On request
|
33,11 € with VAT |
| M10x1,25 DIN374 |
On request
|
49,49 € with VAT |
| M10x1,0 DIN374 |
On request
|
49,49 € with VAT |
| M12 DIN376 |
In stock
(4x)
|
36,20 € with VAT |
| M12x1,5 DIN374 |
In stock
(2x)
|
70,63 € with VAT |
| M12x1,25 DIN374 |
In stock
(4x)
|
42,63 € with VAT |
| M12x1,0 DIN374 |
In stock
(2x)
|
70,63 € with VAT |
| M14 DIN376 |
On request
|
47,01 € with VAT |
| M16 DIN376 |
In stock
(2x)
|
55,85 € with VAT |
| M16x1,5 DIN374 |
In stock
(2x)
|
76,41 € with VAT |
| M18 DIN376 |
On request
|
114,47 € with VAT |
| M18x1,5 DIN374 |
On request
|
109,94 € with VAT |
| M20 DIN376 |
In stock
(4x)
|
109,65 € with VAT |
| M20x1,5 DIN374 |
In stock
(2x)
|
132,97 € with VAT |
| M22 DIN376 |
On request
|
207,64 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- FANAR
- Warranty:
- 24 months
Product information
Form: C (2 ramps)
Fitting: ISO 2, 6HX
Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering)
Coating: TiN
Standard: DIN 371, DIN 2174, ČSN 22 3052
Usage:
1.1: Mild steels and magnetic steels up to 400N / mm2
1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2
2.2: Austenitic stainless steel up to 850N / mm2
1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2
6.3: Brass with long chips up to 700N / mm2
7.1: Aluminum up to 350N / mm2
7.2: Aluminum alloys with Si content <5% up to 700N / mm2
1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2
2.1: Ferritic and martensitic stainless steel up to 1000N / mm2
2.3: Heat-resistant stainless steel up to 1100N / mm2
4.1: Titanium up to 700N / mm2
5.1: Nickel up to 500N / mm2
6.1: Copper up to 350N / mm2
7.3: Aluminum alloys with Si content of 5% to 10% up to 400N / mm2
Variants
Alternatives
-
Forming tap M - HSSE TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR
Forming tap with lubrication groove - final sale (new series see 923005 made of sintered HSSE-PM steel) Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE (High speed steel) Coating: TiN Standard: DIN 374, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content
from 29,44 € with VAT -
Forming tap M - HSSE-PM TiCN ISO2 C(6HX) SR, FANAR
Recommended ✓WGN forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Copper with zinc with long chips
from 16,21 € with VAT -
Forming tap M - HSSE-PM TiN ISO2(6HX) without lubrication groove, FANAR
Forming tap without lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 223052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content
from 15,96 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!