Electric pipe bender OH 060, 400V, 4 limit switches

Pipe bender model 060 is a continuation of a series of hand benders, but already with electric drive. Its design builds on the successful 030 model bender.
Model 060 B is fitted with four end switches for different bending angles on one product.

Max. wall thickness: 2.5 mm
Max. material diameter: 32mm
Bend 180 °: approx. 4s
Max. engine torque: 1400 Nm
Power consumption: 1100W
Electrical connection: 400V
Dimensions (W × H × D): 240 × 750 × 240 mm

The bending machine is highly mobile and stable for use of four additional legs
Can be firmly anchored to the floor
Bend possible in all planes, ie in the space
Operates with the buttons located on the control panel, which is with the cable loosely connected

The bending angle is adjustable by a limit switch up to 180 °, the switch-off is instantaneous at the set value thanks to the brake directly on the drive motor
The built-in automatic protects the machine against unintentional phase polarity. If the phase sequence is incorrect, the machine can not be started and can not be damaged. The great advantage of this bender is the possibility of using all the segments, dies and cogs from the model 030 bender, which is a direct extension of the manual version to the motor
The drive is secured by a powerful electric motor with brakes and planetary gear
The machine is equipped with a power cable socket
The bending angle is secured by a slightly adjustable end switch

The bender is supplied without segments and clamping elements. As a special accessory, the bender can be equipped with bending kits according to your needs.
It is possible to order any atypical segment. In this case, it is necessary to take into account the necessary production pe