Collet ER clamp on ISO taper , type DIN69871
| ISO30 x ER11M - 63mm |
In stock
(2x)
|
45,18 € with VAT |
| ISO30 x ER16 - 63mm |
On request
|
45,18 € with VAT |
| ISO30 x ER16M - 63mm |
In stock
(1x)
|
45,18 € with VAT |
| ISO30 x ER20 - 60mm |
On request
|
45,18 € with VAT |
| ISO30 x ER25 - 63mm |
In stock
(1x)
|
45,18 € with VAT |
| ISO30 x ER32 - 63mm , G2.5/25.000 rpm |
In stock
(7x)
|
45,18 € with VAT |
| ISO40 x ER11M - 60mm , G2.5/25.000rpm |
In stock
(14x)
|
48,88 € with VAT |
| ISO40 x ER11M - 100mm , G2.5/25.000rpm |
In stock
(15x)
|
48,88 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/20.000 rpm |
In stock
(2x)
|
60,15 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/25.000 rpm |
In stock
(10x)
|
60,15 € with VAT |
| ISO40 x ER16 - 70mm , G2.5/25.000 rpm |
On request
|
43,31 € with VAT |
| ISO40 x ER16M - 70mm , G2.5/25.000 rpm |
In stock
(9x)
|
51,68 € with VAT |
| ISO40 x ER16 - 100mm , G2.5/25.000 rpm |
On request
|
51,68 € with VAT |
| ISO40 x ER16M - 100mm , G2.5/25.000 rpm |
In stock
(15x)
|
51,68 € with VAT |
| ISO40 x ER16 - 160mm , G2.5/30.000 rpm |
On request
|
55,33 € with VAT |
| ISO40 x ER16M - 160mm G2.5/25.000 rpm |
In stock
(36x)
|
53,57 € with VAT |
| ISO40 x ER20 - 60mm |
In stock
(16x)
|
41,87 € with VAT |
| ISO40 x ER20 - 70mm G2.5/25.000 rpm |
In stock
(20x)
|
41,87 € with VAT |
| ISO40 x ER25 - 70mm |
In stock
(5x)
|
40,83 € with VAT |
| ISO40 x ER25 - 70mm G2.5/20.000 rpm |
In stock
(24x)
|
43,04 € with VAT |
| ISO40 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(26x)
|
49,26 € with VAT |
| ISO40 x ER25 - 160mm , G2.5 / 25.000 rpm |
In stock
(7x)
|
76,65 € with VAT |
| ISO40 x ER32 - 70mm |
In stock
(10x)
|
41,29 € with VAT |
| ISO40 x ER32 - 70mm , G2.5/30.000 rpm |
On request
|
41,29 € with VAT |
| ISO40 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(7x)
|
54,33 € with VAT |
| ISO40 x ER32 - 150mm , G2.5/25.000 rpm |
In stock
(7x)
|
62,32 € with VAT |
| ISO40 x ER40 - 70mm |
In stock
(3x)
|
43,94 € with VAT |
| ISO40 x ER40 - 70mm , G6.3/15.000rpm |
In stock
(16x)
|
44,66 € with VAT |
| ISO40 x ER40 - 100mm |
In stock
(5x)
|
50,53 € with VAT |
| ISO40 x ER40 - 150mm |
In stock
(11x)
|
64,82 € with VAT |
| ISO40 x ER50 - 80mm |
In stock
(19x)
|
44,19 € with VAT |
| ISO50 x ER25 - 100mm |
In stock
(1x)
|
67,36 € with VAT |
| ISO50 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(10x)
|
75,40 € with VAT |
| ISO50 x ER32 - 80mm |
On request
|
64,00 € with VAT |
| ISO50 x ER32 - 80mm , G2.5/30.000rpm |
In stock
(6x)
|
69,07 € with VAT |
| ISO50 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(14x)
|
75,40 € with VAT |
| ISO50 x ER32 - 160mm |
In stock
(3x)
|
71,40 € with VAT |
| ISO50 x ER32 - 160mm , G2.5/30.000rpm |
In stock
(4x)
|
89,25 € with VAT |
| ISO50 x ER40 - 80mm |
In stock
(10x)
|
74,72 € with VAT |
| ISO50 x ER40 - 80mm , G2.5/30.000rpm |
In stock
(4x)
|
76,34 € with VAT |
| ISO50 x ER40 - 100mm , G2.5/30.000rpm |
On request
|
77,96 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Warranty:
- 24 months
Product information
ISO cone size: according to the selected variant
For ER collets: according to the selected variant
Length of the clamp (the part that sticks out from the spindle): according to the selected variant
Balance: G6.3 / 12,000 rpm. , or according to the selected variant
Throwability: up to 0.005mm
Standard: DIN69871 - automatic tool change
If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
Procedure for clamping the collet:
Snap the collet into the clamping nut - according to the attached picture.
Variants
Accessories
-
Precision ER25 collet , DIN6499B / 430E
Clamping collet series: ER 25 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 430E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
7,16 € with VAT -
Precision ER50 collet , DIN6499B / 477E
Clamping collet series: ER 50 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.020mm up to a diameter of 30mm (including) Clamping accuracy: 0.030mm over a diameter of 30mm Standard: DIN 6499B / 477E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 50mm Length: 60mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
from 20,33 € with VAT -
Precision ER40 collet , DIN6499B / 472E
Clamping collet series: ER 40 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 472E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 40mm Length: 46mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
9,64 € with VAT -
Precision ER32 collet , DIN6499B / 470E
Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
8,25 € with VAT -
Precision ER20 collet , DIN6499B / 428E
Clamping collet series: ER 20 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 428E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 20mm Length: 32mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
7,76 € with VAT -
Precision ER11 collet , DIN6499B / 4008E
Clamping collet series: ER 11 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 4008E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 11mm Length: 18mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
8,37 € with VAT -
Precision ER16 collet , DIN6499B / 426E
Clamping collet series: ER 16 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 426E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
7,16 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!