Collet chuck SK ISO30 x ER32 DIN2080 - 60mm
| ISO30 x ER25 - 63mm |
In stock
(13x)
|
37,36 € with VAT |
| ISO30 x ER32 - 60mm |
In stock
(11x)
|
37,36 € with VAT |
| ISO40 x ER16M - 50mm |
In stock
(12x)
|
36,91 € with VAT |
| ISO40 x ER25 - 60mm |
In stock
(30x)
|
36,91 € with VAT |
| ISO40 x ER32 - 50mm |
In stock
(10x)
|
42,39 € with VAT |
| ISO40 x ER32 - 60mm |
In stock
(22x)
|
42,39 € with VAT |
| ISO40 x ER32 - 70mm |
In stock
(3x)
|
42,39 € with VAT |
| ISO40 x ER40 - 60mm |
In stock
(13x)
|
40,15 € with VAT |
| ISO40 x ER40 - 70mm |
On request
|
40,15 € with VAT |
| ISO40 x ER40 - 80mm |
In stock
(7x)
|
40,15 € with VAT |
| ISO50 x ER32 - 100mm |
In stock
(17x)
|
65,39 € with VAT |
| ISO50 x ER40 - 70mm |
In stock
(14x)
|
75,35 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000280555
- Warranty:
- 24 months
- Code:
- DIN2080-30-ER32-60L
Product information
ISO30xER32 (30xER32)
Length from cone to clamp: 60mm
Max. Collar Size: 20mm
Bolt Thread / Bolt: M12
For Collet Of Outer Diameter: 32mm
Clamp Nut Diameter: 49mm
Collet ER32 Can be Built.
Chassis: up to 0,005mm
DIN 2080, DIN 6499
Collet clamping procedure:
Fasten the clamp nut to the clamping nut - according to the attached picture.
Variants
Accessories
-
Sealed ER32 collet with cooling channels along the bore , DIN6499C / 470ECC
Precision collet ER 32 with two cooling channels in the middle / at the drilling - for drills and milling cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470ECC Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
30,99 € with VAT -
Sealed ER32 collet , DIN6499C / 470EA
Precise collet ER 32 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
22,36 € with VAT -
Precision ER32 collet , accuracy 0.005mm , DIN6499B+ UP / 470EP
Clamping collet series: ER 32 with higher clamping accuracy Size: 3 mm Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 470EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
15,04 € with VAT -
Sealed ER32 tapping collet with square drive , DIN6499A
Sealed ER 32 / GER 32 / GER32 series inner square collet for machine taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A + DIN 6499 B, ISO 15488 A + ISO 15488 B Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
28,99 € with VAT -
Precision ER32 collet , DIN6499B / 470E
Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
8,25 € with VAT -
Tapping ER32 collet with square drive , DIN6499A
Clamping collet with internal square ER 32 / GER 32 / GER32 series for taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
24,04 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!