Collet chuck ISO40 x ER32 BT - 100mm , G2.5/30.000 rpm

Hook clamp for collet chuck Application: For loosening and tightening clamping nuts ER 32 Size: 45-52mm

ER 32 UM / T2

Clamping collet with internal square ER 32 / GER 32 / GER32 series for taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Sealed ER 32 / GER 32 / GER32 series inner square collet for machine taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A + DIN 6499 B, ISO 15488 A + ISO 15488 B Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamping collet series: ER 32 with higher clamping accuracy Size: 3 mm Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 470EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precision collet ER 32 with two cooling channels in the middle / at the drilling - for drills and milling cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470ECC Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precise collet ER 32 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.