Universal self-centering chuck TOS IUG 250 / 3-2 M2, ČSN 243809
| IUG 80/3-1 (type Superior) |
In stock
(3x)
|
281,00 € with VAT |
| IUG 80/3-2 (type Standard) |
In stock
(3x)
|
248,90 € with VAT |
| IUG 125/3-1 (type Superior) |
In stock
(3x)
|
345,50 € with VAT |
| IUG 125/3-2 (type Standard) |
In stock
(5x)
|
299,25 € with VAT |
| IUG 160/3-1 (type Superior) |
On request
|
393,33 € with VAT |
| IUG 160/3-2 (type Standard) |
In stock
(2x)
|
351,17 € with VAT |
| IUG 200/3-1 (type Superior) |
In stock
(1x)
|
483,01 € with VAT |
| IUG 200/3-2 (type Standard) |
In stock
(2x)
|
436,43 € with VAT |
| IUG 250/3-1 (type Superior) |
In stock
(1x)
|
705,48 € with VAT |
| IUG 250/3-2 (type Standard) |
In stock
(1x)
|
646,95 € with VAT |
| IUG 315/3-1 (type Superior) |
In stock
(1x)
|
1.218,37 € with VAT |
| IUG 315/3-2 (type Standard) |
In stock
(1x)
|
1.092,82 € with VAT |
| IUG 400/3-1 (type Superior) |
On request
|
1.752,67 € with VAT |
| IUG 400/3-2 (type Standard) |
On request
|
1.567,34 € with VAT |
| IUG 500/3-1 (type Superior) |
On request
|
7.204,93 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000125580
- Brand:
- TOS Svitavy
- Warranty:
- 24 months
- Code:
- 2438090253220
Product information
250 / 3-2 M2 TOS Svitavy, TYPE 2438090253220
Diameter: 250mm
Clamping: M2
Accuracy: "2" - Common turning accuracy
ČSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350
Chuck housing: Ductile cast iron
Two universal sets of jaws (1x internal and 1x outer) are supplied with universal. clamping screws and loop
Cutting surface function, clamping precision and extending chuck life
- > Balanced spiral wheel reduces vibration at higher speed
HEM ??200 mm
F ± 0,2 224 mm
G 3xM12 mm
H 97,5 mm
J 33 mm
K 12 mm
L 143,5 mm
N 93 , 5 mm
O 29.5 mm
P 3 x 13 mm
R 76 mm
S 5 mm
T 82 mm
U 91 mm
Variants
Accessories
-
Monoblock jaw MC 250/3 ČSN 243834, TOS
Soft Jaws / Soft Jaws Set of Monoblock Soft Jaws MC Universal Chuck 250mm, Three Jaws ČSN 243834 These replacement jaws fit ONLY to chucks TOS Svitavy. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
On request126,49 € with VAT -
Hard outer jaw SCV 250/3 - 2 for self-centering universal chuck TOS
2 - - Lathe precision (standard) ČSN 243849/24 3849 These jaws are referred to as "classical" lathes. They are suitable for clamping the workpiece for the inner diameter, but according to the manufacturer's catalog are referred to as external! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock136,88 € with VAT -
Hard inner jaw SCN 250/3 - 2 for universal self-centering chuck TOS
New Unused Set of Inside Jaws for Universal 250mm Three-Piece, for Accuracy 2 - Normal Marking: SCNB 250 / 3-2, 243850253200 Explanatory notes: 1 - Abrasive Precision (Superior) 2 - Lathe precision (standard) ČSN 243850/24 3850 These jaws are referred to as "opposite". They are suitable for workpiece clamping for outdoor diameter, but according to the manufacturer's catalog are called internal!
In stock136,88 € with VAT -
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX
Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.
In stock40,23 € with VAT
Alternatives
-
Universal self-centering chuck KUS 250/3 M3, Kovonastroje
Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 250 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see enclosed PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chassis is delivered in a wooden box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.
In stock282,09 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!