Universal self-centering chuck KUS 160/3 D5 Camlock ČSN 243830, Kovonastroje

Set of monoblock jaws for universal ITEM 160/3 Designation: MT 160/3 The lower clamping part with gears is hardened, the top is me kkA1 - easily machinable. Jaws are not confused with jaws of other brands !!!

Clamping spanner for universal chuck, square loop Square: 10mm

Intermediate flange with short cone with threaded pins Camlock - semi-finished product Cone size: 5( larger diameter = 82,5mm) Outer diameter of flange: 160mm Axis of clamping pins: 104,8mm Width of body of flange: 29,5mm < br> Material: Cast iron HT300 Tensile strength: 250-350MPa, Hardness: 190-240HBS Composition: Cmax = 2.8-3.2%, SiMax = 1.7-2 , 1%, Mn = 0,9-1,2%, Pmax

These jaws are called "classical" lathes. Jaws are not interchangeable with jaws of other brands !!!

Set of internal jaws for universal piece ITEM 160mm three-pointed Designation: IJS 160/3 These jaws are called lathes Â!Ny as "opposite". Jaws are not confused with jaws of other brands !!!

Set of soft split jaws for universal KUS 160/3 Designation: SD 160/3 The lower clamping part with teeth ( with combs) is hardened, the screwed tops can be machined - soft The jaws are not interchangeable with jaws of other brands!!!

Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.