Universal chuck 100 mm for wood lathe with 1 "thread

Set of 4 jaws for chuck - see related products Clamping range: Behind the inner edge of the jaws: 85-120mm Behind the outer edge of the jaws: 100-135mm Inner height of the jaws for clamping the workpiece: 11mm Material: steel

Set of 4 jaws for chuck - see related products Clamp range: Inside: 7-44mm, depth 32mm Outside: 26-62mm, depth 25mm When clamping the log by the inner edge of the jaws, it is necessary to insert the material at least to the full depth of the jaws and tighten with sensitivity - each jaw holds only one screw. Material: steel

Set of 4 jaws for chuck - see related products Clamping range: Inside: 7-44mm, depth 42mm Outside: 36-73mm, depth 35mm ( when clamping at the heel up to 85mm) Material: steel

Jaws / face plate with chuck threads - see related products Clamping range: Inside: 58-250mm Outside: 94-290mm Height of pins: 12mm Max. revolutions: 600 rpm. Material: aluminum alloy Suitable for the production of plates, bowls or the processing of larger workpieces.

Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.