Turning knife S25S TWLNL 06 for hole, AKKO
25mm / WNMG 0604 |
On request
|
103,13 € with VAT |
25mm / WNMG 0804 |
On request
|
103,13 € with VAT |
32mm / WNMG 0604 |
On request
|
127,32 € with VAT |
32mm / WNMG 0804 |
On request
|
127,32 € with VAT |
40mm / WNMG 0804 |
On request
|
166,79 € with VAT |
50mm / WNMG 0804 |
On request
|
201,16 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000518504
- Brand:
- AKKO
- Warranty:
- 24 months
- Code:
- A-S25S-TWLNL-06
Product information
Knife for internal turning S25S-TWLNL06 95°
Knife size: diameter 25 mm
Face angle: -7°
Blade angle: -13°
Total length of the knife: 250mm
Interchangeable inserts are marked WNM. 0604.. (ie. WNMA 0604.. , WNMG 0604.. etc. )
A key for changing the blade is supplied with the goods.
The plate is not part of the package, it can be purchased separately - see related products.
Variants
Accessories
-
Replaceable insert WNMG 060404-M3P IC830, Iscar
Lathe insert VBD WNMG 060404 M3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328808 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock7,82 € with VAT -
Replaceable insert WNMG 060408-F3P IC830, Iscar
Turning insert VBD WNMG 060408 F3P IC830 Radio 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type F3P: for common and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 3328799 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock9,46 € with VAT -
Replaceable insert WNMG 060408-M3P IC830, Iscar
Turning insert VBD WNMG 060408 M3P IC830 Radio 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328809 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock7,82 € with VAT -
Replaceable insert WNMG 060408-TF IC830, Iscar
Turning insert VBD WNMG 060408 TF IC830 Radio 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 3308167 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock9,46 € with VAT -
Replaceable insert WNMG 060404-F3P IC830, Iscar
Turning insert VBD WNMG 060404 F3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type F3P: for common and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 3328797 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock9,78 € with VAT -
Replaceable insert WNMG 060404-WG IC8150, Iscar
VBD WNMG 060404 WG - Wiper IC8150 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8150 Series: < / b> Hard substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to peeling and plastic deformation. It is recommended for high-speed machining of steels under stable conditions. Application: Steel: P01-P30 Cast iron: K05-K15 General conditions - see attached photo WG Type: Suitable for machining with large with a very smooth surface. Ref. : 5550530
In stock11,12 € with VAT -
Replaceable insert WNMG 060404-HM NC3120, Tornado
WNMG 060404 - HM NC3120 Double sided plate Radius 0,4mm NC3120 series: High resistance to chipping, resistant to high temperatures. Application: Steel: P15-P30 HM Type: Suitable for normal machining, suitable for uninterrupted and intermittent cut. Suitable for high speed machining, high feed, CNC machining.
In stock6,46 € with VAT -
Replaceable insert WNMG 060408-WG IC8250, Iscar
IC8250 series: < / b> Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Application: Steel: P10-P35 Stainless Steel: M05-M20 WG Type: Suitable for machining with large with a very smooth surface. Ref. : 5508233
In stock11,12 € with VAT -
Replaceable insert WNMG 060408-PP IC907, Iscar
VBD WNMG 060408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Supersellents: S05-S20 Hardnesses: H05-H15 Resistant conditions - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5506167
In stock9,46 € with VAT
Alternatives
-
Turning knife S25S PWLNL 06 for hole, AKKO
Insert holder S25S PWLNL 06 93° Knife for internal turning S25S-PWLNL06 93° Knife size: diameter 25 mm Total length of knife: 250 mm Inserts are marked WNM . 0604.. (ie. WNMG 0604.. , WNMM 0604.. , WNMA 0604.. etc. ) A key for changing the blade is supplied with the goods. The plate is not part of the package, it can be purchased separately - see related products.
On request103,13 € with VAT -
Lathe knife S25S MWLNL 06 for hole, AKKO
Plate holder S25S MWLNL 06 95 ° Internal turning tool S25S-MWLNL06 95 Â ° The size of the tool is: diameter â € oR 25 mm Bevel angle: -7A ‚Â ??° Bevel angle: -13 ° ‚Total blade length: 250mm Replacement plate ky are marked WNM. 0604 ..(ie WNMA 0604 .., WNMG 0604 .. etc.) A key for changing the blade is supplied with the goods.
In stock103,13 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!