Turning knife 10x10mm left with exchangeable insert and key

New original replaceable insert in original packaging ( when buying 10 pcs), according to ANSI standard: TCMT 2(1.5)1E-FM Suitable for fine and finishing turning, boring. Size : 11 Thickness : 02 (2.38mm) Radius : 02 (0.2mm) Wave Material : T8430 - PVD (TiBN TiN AlTiN) It is the most versatile material for general turning and heavy roughing, even under very adverse conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Usage: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 Order no. no.: 80032911 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD TCGT 110204 - AS IC20 Radius 0,4mm Coating: non-coated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Cat. No .: 5540023

Turning insert VBD TCMT 110204 SM IC9350 Radius 0,4mm Coating: CVD, TiCN alpha Al2O3 TiN < b> Series IC9350: Very solid substrates with cobalt layer supplemented by MTCVD TiCN and Al2O3 coating. Excellent rigidity and resistance to wear when machining steel. Suitable for intermittent and unstable cutting conditions. Steel: P20-P45 Stainless steel: M15-M30 Terms - see attached photo Type SM : Perfect for common and finishing operations, ideal for machining non-traditional alloys Cat. Ä. : 5507615 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

New original replacement insert in original package( with 10pcs), according to ANSI standards: TCMT 2(1.5)1E-FM Suitable !For fine and finishing turning, boring. Size: 11 Thickness: 02(2,38mm) Radius: 02(0,2mm) Sheet material: T8315 Application: Steel: P05-P20 Stainless steel 28: M05-M20 Cast iron: K05-K25 Superalloys(Ni , Co, Fe, Ti): S05-S15 Ord. Ä. : 80015445 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD TCMT 110204 SM IC907 Radius 0,4mm Coating: PVD, TiAlN TiN IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is TCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Types SM: , ideal for machining non-traditional alloys Kat. No .: 5504887

Turning insert VBD TCMT 110202 PF IC807 Radius 0,4mm Coating: TiAlN, PVD A IC807 Series: Rigid sub-micron substrate. Suitable for low to medium cutting speeds. Developed for machining heat-resistant steels, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K10-K30 Superalloys: S05-S20 Carbides: H05 -H15 General conditions - see attached photo Type PF: Suitable for finishing operations of common steels and non-traditional alloys. Contact the Company: Kat. Ä. : 5550443 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

TCMT 110204 HMP NC3120 Radius 0,4mm Coating: MT-CVD: TiCN Al2O3 TiCN NC3120 Series: High resistance to chipping, resistant to high temperatures. Application: Steel: P15-P30 HMP Type: Medium to finishing geometry of small chips. The wider wall of the trowel ensures extended plate life - even with sudden change in cutting depth.

Turning insert VBD TCGT 110204 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min fn = 0.02-0.15 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

New original replaceable insert in original packaging ( when buying 10 pcs), according to ANSI standard: TCMT 2(1.5)1E-UR Suitable for fine and finishing turning, boring. Size : 11 Thickness : 02 (2.38mm) Radius : 04 (0.4mm) Wave Material : T8430 - PVD (TiBN TiN AlTiN) It is the most versatile material for general turning and heavy roughing, even under very adverse conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Usage: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

New original replacement insert in original package( with 10pcs), according to ANSI standards: TCMT 2(1.5)1E-FM Suitable !For fine and finishing turning, boring. Size: 11 Thickness: 02(2,38mm) Radius: 04(0,4mm) Sheet material: T8315 Application: Steel: P05-P20 Stainless steel 28: M05-M20 Cast iron: K05-K25 Superalloys(Ni , Co, Fe, Ti): S05-S15 80016994 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put in basket 10pcs.

New original replaceable insert in original packaging according to ANSI standard: TCMT 2 (1.5) 1E-UR Suitable for fine and finishing turning, boring. Size: 11 Thickness: 02 (2,38mm) Radius: 04 (0,4mm) Material of slicer: T9315 Usage: / b> Steel: P05-P25 Stainless (Abrasion Resistant): --- Cast Iron: K05-K25 Non Ferrous Metals (Aluminum and Copper) , Co, Fe, Ti): --- Hardstock: H10-H20 80016155

New original replaceable insert in original packaging according to ANSI standard: TCMT 2 (1.5) 1E-UR Suitable for fine and finishing turning, boring. Size: 11 Thickness: 02 (2,38mm) Radius: 04 (0,4mm) Material of the blade: T9325 Usage: / b> Steel: P15-P35 Stainless Steel: M10-M30 Cast Iron: K15-K35 Non Ferrous Metals (Aluminum and Copper) , Co, Fe, Ti): --- Hardwood: --- 80016178