Three-edged countersink 35-63mm for TPUN 2204, VCE-4563

Variant:

Choose variant

10-31mm	In stock (2x)	58,83 € with VAT
20-50mm	In stock (2x)	60,33 € with VAT
35-63mm	In stock (4x)	83,83 € with VAT

Current price:

83,83 € with VAT

69,28 € without VAT

In stock (4x)

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:: 1000000313284
Brand:: VERTEX
Warranty:: 24 months
Code:: 6004-009

Product information

Countersink Countersink / Countersink for VBD

Range: 35 - 63 mm
Rectangle Angle: 45 °
Clamping Shank: 25mm
Overall Length: 150mm
Screw: W 5/16 "

steel and cast iron (not suitable for machining stainless steel!)

Cat. No.: 6004-009

Variants

10-31mm

Code: 6004-006

In stock

58,83 € with VAT

20-50mm

Code: 6004-007

In stock

60,33 € with VAT

35-63mm

Code: 6004-009

In stock

83,83 € with VAT

Accessories

Interchangeable insert TPUN 220412 IC20, Iscar

VBD TPUN 220412 IC20 IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Terms and conditions - see attached photo Kat. No. 05502380

In stock

8,58 € with VAT
Replaceable insert TPKR 2204PDTR-HS IC328, Iscar

Milling insert VBD TPKR 2204PDTR-HS IC328 Coating: PVD, TiCN IC328 series: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type HS: Type with uneven / stepped blades for chip splitting and lower vibration. Contact the Company: Kat. Ä. : 5601816 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

In stock

15,27 € with VAT
Replaceable insert TPKN 2204PDTR-42 IC328, Iscar

Milling insert VBD TPKN 2204PDTR-42 IC328 Coating: PVD, TiCN IC328 series: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type -42: Beveled edge -> plates are without radius. Longer plate life. Contact the Company: Kat. Ä. : 5601262 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

In stock

11,00 € with VAT
Replaceable insert TPKR 2204PD-R-76 IC328, Iscar

Milling insert VBD TPKR 2204PD-R-76 IC328 Perfect for heavy-duty machining of ordinary and stainless steels on old mills Narex, Vertex etc., low cutting forces, very good surface. Coating: PVD, TiCN IC328 Series : Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type -76: Type with grooves along the cutting edge -> lower heat transfer during roughing. Suitable for intermittent cutting. Contact the Company: Kat. Ä. : 5601816 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

In stock

11,82 € with VAT
Replaceable insert TPUN 220408 IC9054, Iscar

VBD TPUN 220408 IC9054 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN IC9054 Series: High rigidity, suitable for machining carbon alloys, steel alloys and stainless steel at normal and higher cutting speeds. Usage: Steel: P15-P40 Stainless Steel: M10-M30 Terms and conditions - see attached photo Cat. No .: 5507598

In stock

11,19 € with VAT