Thread turning knife SIR 0013 M16B for hole with internal cooling, Carmex
| 16mm (10mm) / 11 IR |
In stock
(1x)
|
85,37 € with VAT |
| 16mm (13mm) / 16 IR |
On request
|
87,40 € with VAT |
| 20mm (16mm) / 16 IR |
In stock
(1x)
|
85,70 € with VAT |
| 20mm / 16 IR |
In stock
(1x)
|
95,44 € with VAT |
| 25mm / 16 IR |
In stock
(1x)
|
105,19 € with VAT |
| 25mm / 22 IR |
In stock
(1x)
|
112,95 € with VAT |
| 32mm / 16 IR |
On request
|
132,42 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000380118
- Brand:
- CARMEX
- Warranty:
- 24 months
- Code:
- CX-SIR-0013-M16B
Product information
Knife for internal turning vit, for threaded plates SIR0013P16B
Thread knife holder, for threaded plates
Clamping diameter: 16 mm
Total blade length: 150mm
Min. hole diameter: 16mm
Interchangeable blades are marked 16 IR
A key is supplied with the goods for exchanging the blade
The holder is without a threaded plate - must be purchased separately.
Carmex, Pramet, Iscar, Konan and other plates fit in the holder.
Variants
Accessories
-
Washer AI16 (-1.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: -1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 4.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 4.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16 (-0.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: -0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 0.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock15,15 € with VAT -
Washer AI16( 2.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 2.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
Washer AI16( 3.5°) for threaded inserts 16IR and 16EL, Carmex
AE16 washer for threaded inserts 16 IR and 16 EL Angle: 3.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 IR or 16 EL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AI16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request15,15 € with VAT -
AI16-0 washer for 16EL and 16IR inserts, Carmex
AI16-0 washer for grooving / grooving three-sided inserts For Carmex external left and internal right threaded holders - bed size 16 - for 16IR/EL inserts If you want a threaded holder to fit with a grooving plate, you need to use this plate. Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock15,17 € with VAT -
Washer AI16 for threaded inserts 16EL and 16IR, Carmex
AI16 washer for threaded three-sided inserts Angle: 0° For Carmex external left and internal right threaded holders - bed size 16 - for threaded inserts 16IR/EL Suitable for Carmex holders only, compatibility with other brands cannot be guaranteed.
In stock11,29 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!