STJCL 2525 M16, AKKO lathe knife

VBD TCMT 16T304 SM800 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type SM: Perfect for routine and finishing operations, ideal for machining non-traditional alloys Cat. No .: 5568606

VBD TCMT 16T304 SM IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is TCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Types SM: , ideal for machining non-traditional alloys Kat. No. 5505571

VBD TCMT 16T308 SM IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type SM: Perfect for routine and finishing operations, ideal for machining non-traditional alloys Cat. No .: 5568613

Lathe insert VBD TCMT 16T304 - HMP NC3120 Radius 0,4mm Insert material: NC3120 - suitable for running Machining to roughing steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 City type: Medium until the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TCMT 16T308 - HMP PC5300 Radius 0,8mm Sheet material: PC5300: Universal series for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40 Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Type HMP: Medium to finishing geometry of the breaker for little ones. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TCMT 16T308 - C25 PC5300 Radius 0,8mm Sheet material: PC5300: Universal A ™ series for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: (Steel: P30 -P40) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker C25: Suitable for intermittent Cutting, for common machining of cast iron, stainless steel and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD TCMT 16T304 - C25 PC5300 Radius 0,4mm Sheet material: PC5300: Universal series for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: (Steel: P30 -P40) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker C25: Suitable for intermittent Cutting, for common machining of cast iron, stainless steel and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TCGT 16T304 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.40 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD TCMT 16T308E-UR 8030 Art. Nr. 80011293 Radius 0.8mm suitable for: steel, stainless steel, cast iron Material of blade: T8330 Application: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-ferrous metals (aluminum and copper): --- Superslitins (Ni, Co, Fe, Ti): S15-S25 Hardwoods: 80016335

VBD TCMT 16T308E-UR 8030 Art. Nr. 80015884 Radius 0,8mm Steel < P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 80015884

TCMT 16T304 E-FM Interchangeable Suitable for fine and finishing turning, boring. Size: 16 Thickness: T3 (3,97mm) Radius: 04 (0,4mm) Material of the blade: T9325 Usage: / b> Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitin (Ni, Co, Fe, Ti): S20-S30 80016179

VBD TCMT 16T308 SM IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is TCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Types SM: , ideal for machining non-traditional alloys Kat. No .: 5505283

TCMT 16T308 HMP NC3120 Radius 0,8mm Coating: MT-CVD: TiCN Al2O3 TiCN NC3120 Series: High resistance to chipping, resistant to high temperatures. Application: Steel: P15-P30 HMP Type: Medium to finishing geometry of small chips. The wider wall of the trowel ensures extended plate life - even with sudden change in cutting depth.