Self-tightening PROFI drill chuck, runout up to 0.06mm

Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze

Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

Right-handed ground spiral cobalt drill for stainless steel with reinforced core and cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 130 ° Helix angle: 36 ° Material: HSSE - High speed steel + Co5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile.

Right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Edge angle: 128 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 25-30 ° Material: HSSE - High speed steel + Co8 Standard: DIN338 (replaces PN 2906 / PN2906) Usage: General - hand, stand, column drills Titanium alloys Austenic steels resistant to corrosion, acids and heat High-strength and low-tensile steels with tensile strength up to 1200MPa Hardox 450 and Hardox 500 Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile. * Possibility of delivery with TiN or TiAlN coating.

Mandrel for drill chuck (mandrel to chuck) with cylindrical shank Cylindrical shank diameter: according to the selected variant Cone for the header: according to the selected variant Length of the cylindrical part - see the description of the individual variant

Taper milling mandrel for drill chuck (mandrel to chuck), female thread type Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Cone for the header: according to the selected variant Clamping of the drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper.

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: MAS BT / JIS 6339 B - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change This mandrel can also be used in machines with manual tool change.

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine - with manual tool change

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change

Taper drill mandrel for drill chuck (mandrel to chuck), type with carrier Spindle taper (morse): according to the selected variant Cone for the header: according to the selected variant Standard: ČSN 241329 / CSN 24 1329