Self-centering 3-jaw universal lathe chuck TOS IUG , DIN6350

Set of soft split jaws for TOS Svitavy three-jaw universal Designation : MD Standard: ČSN 243876 / 24 3876 The lower part of the jaws is hardened, the upper part is soft - machinable These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

A set of soft monobloc soft jaws for the three-jaw universal TOS Svitavy Designation : MC Standard: ČSN 243834 The entire jaw is soft - machinable These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Base jaws / bottom ridges for TOS Svitavy three-jaw universal chuck Standard: ČSN 24 3855 Heat treated - hardened. These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Set of inner jaws for the TOS Svitavy three-jaw universal Designation: SCNB (also abbreviated as SCN) Standard: ČSN 243850 / 24 3850 They are suitable for clamping the workpiece by the outside diameter, but according to the manufacturer's catalog they are designated as internal! These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Set of outer jaws for TOS Svitavy three-jaw universal Designation: SCVB (also abbreviated as SCV) Standard: ČSN 243849 / 24 3849 They are suitable for clamping the workpiece by the inner diameter, but according to the manufacturer's catalog they are designated as outer! These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Soft attachments for the basic jaw of SM chucks TOS Svitavy Number of extensions: according to the selected variant Standard: ČSN 243857 / 24 3857 The attachments are soft, workable. The attachments ONLY fit TOS Svitavy soft split jaws. If you have a non-TOS universal chuck, they will not fit 100%.

Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.