SCLCL 2525 M12 lathe knife

VBD CCMT 09T308 - C25 NC3120 Radius: 0,8mm Material of the blade: NC3120 MT-CVD: TiCN Al2O3 TiCN Application: Steel: P10-P35 Stainless Steel: br> fn = 0.15mm / rev (0.10 - 0.30) vc = 250m / min (150-350)

CCMT 09T304 - C25 NC3120 Uses: Steel: P10-P35 Stainless steel: M05-M10 Cast iron: --- Non-ferrous metals (aluminum and copper): --- Super-alloys (Ni, Co, Fe, Ti): --- Hardened: ---

Replacement cutting insert CCMT 09T304 - HMP NC3120 Radius: 0,4mm Sheet material: NC3120 - suitable for common machining to roughing of steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 City type: Medium until the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement cutting insert CCMT 09T308 - HMP PC9030 Radius: 0.8mm Sheet material: PC9030 - universal sorta - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 City type: Steel Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement cutting insert CCMT 09T304 - HMP PC9030 Radius: 0,4mm Sheet material: PC9030 - universal sorta - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titanium Aluminum Nitride) Application: Stainless steel: M25-M35 City type: Steel One to the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement cutting insert CCMT 09T308 - HMP NC3120 Radius: 0,8mm Sheet material: NC3120 - suitable for common machining to roughing of steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 City type: Medium until the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCGT 09T304 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min fn = 0.03-0.4 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCGT 09T308 - AL H01 Radius: 0,8mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.4 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.