Machine needle 2-42mm 90° MK2 inner edges, KOPAL
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000338355
- Brand:
- KOPAL (Francie)
- Warranty:
- 24 months
- Code:
- KO-01-091
Product information
Range: 3-41mm
Bevel angle: 90 Â °
Number of runs: 1(run is rotating - ie for two uses)
Clamping shank: morse 2 / MK2
The coaster is delivered without running â „c itu , these can be purchased with a sharp angle:
a) 14 Â °(cat. No. 01-350), suitable for special bronze, plexiglass
b) 20 Â °(cat. no. 01-358), suitable for ordinary steel, steel, plastics, stainless steel
c) 25 Â °(cat. no. 01-359), suitable for aluminum, iron, sheets
Needle dimensions:
Total length: 165mm
Front diameter Parts: 42mm
Diameter of aluminum nuts: 65mm and 60mm
Shank length: 78mm
Blade insertion procedure and height adjustment deburring / chamfering
1) Loosen the worms on the body of the trimmer(in the milled groove).
2) Insert the body into the body, secure it with two worms.
3) Adjust the chamfer height by tightening / loosening the aluminum nut.
4) Make sure that the runner is not drowned in the body of the needler, if so, rearrange the aluminum nut and check so that the runner protrudes.
5) Always tighten the aluminum nuts with the sprocket.
Accessories
-
90° HSS blade for needler 01-091 with undercut 14°, KOPAL
Run for machine needle 01-091 brand KOPAL. Shrink angle: 90 ° Podbrus blade: 14 ° Material: HSS Coating: uncoated Bronze, plexiglass You can compare the differences in the tablecloth in the attached photos. Contact the Company: Kat. Ä. : 01-350
In stock82,32 € with VAT -
90° HSS blade for needler 01-091 with undercut 20°, KOPAL
Run for machine needle 01-091 brand KOPAL. Shrinkage angle: 90 ° Podbrus blade: 20 ° Material: HSS Coating: uncoated Usage: suitable for Stainless steel, swords, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Contact the Company: Kat. Ä. : 01-358
In stock82,32 € with VAT -
90° HSS blade for 01-091 needler with 25° undercut, KOPAL
Run for machine needle 01-091 brand KOPAL. Shrinkage angle: 90 ° Podbrus blade: 25 ° Material: HSS Coating: uncoated , Iron, Sheets You can compare the differences in the tablecloth in the attached photos. Contact the Company: Kat. Ä. : 01-359
In stock82,32 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!