Machine needle 2-36mm 90° MK2 outer edges, KOPAL
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000431452
- Brand:
- KOPAL (Francie)
- Warranty:
- 24 months
- Code:
- KO-02-030
Product information
Range: 4-37mm
Bevel angle: 90
Number of slots for edge inserts : 2
Clamping shank: MK2(morse 2)
The coaster supplies it n without bend , these can be purchased with a sharp angle: < br> a) 0 Â °(cat. no. 02-312), suitable for brass, bronze, cast iron, Heat-resistant steel
b) 14 Â °(cat. No. 02-310), suitable for special bronze, plexiglass
c) 20 Â °(cat. No. 02-313), suitable for ordinary steel, copper, plastics, stainless steel
d) 20 Â ° TiN(cat. no. 2T310B), suitable for ordinary steel, stainless steel, inconel, titanium
e) 25 Â °(cat. no. 02-314), suitable for aluminum, iron, sheets
Needle dimensions:
Total length: 120mm
Diameter of front part: 43mm
Diameter of aluminum nuts: 65mm and 60mm
Length of clamping shank: 38mm
How to insert the blade and set the height of the needling / chamfering edges
1) Loosen the worms on the body of the pin(in the milled groove).
2) Insert the body into the body, secure it with two worms.
3) Adjust the chamfer height by tightening / loosening the aluminum nut.
4) Make sure that the runner is not drowned in the body of the needle, if so, rearrange the aluminum nut and check so that the runner protrudes.
5) Always tighten the aluminum nuts with the sprocket.
Accessories
-
90° HSS blade for needlers with a range of 37-120mm with undercut 14°, KOPAL
Run for 90 ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Shrink angle: 90 ° Podbrus blade: 14 ° Material: HSS Coating: uncoated Bronze, plexiglass You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. Ä. : 02-310
In stock81,22 € with VAT -
90° HSS blade for needlers with range 37-120mm with undercut 20°, KOPAL
Run for 90 ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Shrinkage angle: 90 ° Podbrus blade: 20 ° Material: HSS Coating: uncoated Usage: suitable for Stainless steel, swords, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. Ä. : 02-313
In stock232,76 € with VAT -
90° HSS blade for needlers with range 37-120mm with undercut 25°, KOPAL
Run for 90 ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Shrinkage angle: 90 ° Podbrus blade: 25 ° Material: HSS Coating: uncoated , Iron, Sheets You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. Ä. : 02-314
In stock81,22 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!