Lamellar block with longitudinal polarization for magnetic clamps
| 75x75x25mm |
On request
|
0,00 € with VAT |
| 75x100x25mm |
On request
|
0,00 € with VAT |
| 75x200x25mm |
On request
|
0,00 € with VAT |
| 75x300x25mm |
On request
|
0,00 € with VAT |
| 75x320x25mm |
On request
|
0,00 € with VAT |
| 75x400x25mm |
On request
|
0,00 € with VAT |
| 75x600x25mm |
On request
|
0,00 € with VAT |
| 75x650x25mm |
On request
|
0,00 € with VAT |
| 100x100x25mm |
On request
|
0,00 € with VAT |
| 100x200x25mm |
On request
|
0,00 € with VAT |
| 100x300x25mm |
On request
|
0,00 € with VAT |
| 100x600x25mm |
On request
|
0,00 € with VAT |
| 100x650x25mm |
On request
|
0,00 € with VAT |
| 150x200x25mm |
On request
|
0,00 € with VAT |
| 150x350x25mm |
On request
|
0,00 € with VAT |
| 200x200x25mm |
On request
|
0,00 € with VAT |
| 200x300x25mm |
On request
|
0,00 € with VAT |
| 200x400x25mm |
On request
|
0,00 € with VAT |
| 250x250x25mm |
On request
|
0,00 € with VAT |
| 300x300x25mm |
On request
|
0,00 € with VAT |
| 300x400x25mm |
On request
|
0,00 € with VAT |
|
On request
|
0,00 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- ČR
- Warranty:
- 24 months
Product information
Suitable for permanent magnets and electromagnets.
Width x Length x Height: according to the selected variant
Pole pitch: 3mm steel, 1mm brass
The minimum order quantity is 1-3 pieces depending on the size. Contact us for more information.
Lamella blocks make it possible to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of a magnetic clamping plate.
It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces.
Compared to cheap lamellar blocks from other manufacturers (e.g. Vertex), these blocks are not glued, but soldered - in significantly higher quality. Blocks can be cut in half and modified according to current needs.
Variants
Alternatives
-
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock63,69 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock71,93 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock252,81 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!