Internal turning knife DIN 4973 R / CSN 223724 , DENAS
Variant:
8x8 P10 - for steel |
In stock
(2x)
|
6,49 € with VAT |
8x8 P20 - for steel |
In stock
(6x)
|
6,49 € with VAT |
8x8 P30 - for steel |
In stock
(5x)
|
6,49 € with VAT |
8x8 P45 - for steel |
On request
|
6,49 € with VAT |
8x8 K05 - for cast iron |
On request
|
6,49 € with VAT |
8x8 K10 - for cast iron |
On request
|
6,49 € with VAT |
8x8 U10 - for INOX |
On request
|
6,49 € with VAT |
8x8 U30 - for INOX |
On request
|
6,49 € with VAT |
10x10 P10 - for steel |
On request
|
6,97 € with VAT |
10x10 P20 - for steel |
In stock
(2x)
|
6,11 € with VAT |
10x10 P30 - for steel |
In stock
(10x)
|
6,97 € with VAT |
10x10 P45 - for steel |
On request
|
6,97 € with VAT |
10x10 K05 - for cast iron |
On request
|
6,97 € with VAT |
10x10 K10 - for cast iron |
On request
|
6,97 € with VAT |
10x10 U10 - for INOX |
In stock
(3x)
|
6,97 € with VAT |
10x10 U30 - for INOX |
On request
|
6,97 € with VAT |
12x12 P10 - for steel |
In stock
(5x)
|
7,45 € with VAT |
12x12 P20 - for steel |
In stock
(11x)
|
7,84 € with VAT |
12x12 P30 - for steel |
In stock
(19x)
|
7,45 € with VAT |
12x12 P45 - for steel |
In stock
(2x)
|
7,84 € with VAT |
12x12 K05 - for cast iron |
On request
|
7,45 € with VAT |
12x12 K10 - for cast iron |
In stock
(5x)
|
7,45 € with VAT |
12x12 U10 - for INOX |
On request
|
7,45 € with VAT |
12x12 U30 - for INOX |
On request
|
7,45 € with VAT |
16x16 P10 - for steel |
On request
|
8,31 € with VAT |
16x16 P20 - for steel |
In stock
(14x)
|
8,75 € with VAT |
16x16 P30 - for steel |
In stock
(7x)
|
8,75 € with VAT |
16x16 P45 - for steel |
On request
|
8,31 € with VAT |
16x16 K05 - for cast iron |
On request
|
8,31 € with VAT |
16x16 K10 - for cast iron |
On request
|
8,31 € with VAT |
16x16 U10 - for INOX |
On request
|
8,31 € with VAT |
16x16 U30 - for INOX |
On request
|
8,31 € with VAT |
20x20 P10 - for steel |
On request
|
10,96 € with VAT |
20x20 P20 - for steel |
In stock
(3x)
|
10,96 € with VAT |
20x20 P30 - for steel |
In stock
(5x)
|
10,96 € with VAT |
20x20 P45 - for steel |
On request
|
10,96 € with VAT |
20x20 K10 - for cast iron |
On request
|
10,96 € with VAT |
20x20 K20 - for cast iron |
On request
|
10,96 € with VAT |
20x20 U10 - for INOX |
On request
|
10,96 € with VAT |
20x20 U30 - for INOX |
On request
|
10,96 € with VAT |
25x25 P10 - for steel |
On request
|
16,06 € with VAT |
25x25 P20 - for steel |
On request
|
16,06 € with VAT |
25x25 P30 - for steel |
In stock
(3x)
|
16,06 € with VAT |
25x25 P45 - for steel |
On request
|
16,06 € with VAT |
25x25 K05 - for cast iron |
On request
|
16,06 € with VAT |
25x25 K10 - for cast iron |
On request
|
16,06 € with VAT |
25x25 U10 - for INOX |
On request
|
16,06 € with VAT |
25x25 U30 - for INOX |
On request
|
16,06 € with VAT |
32x32 P10 - for steel |
On request
|
23,12 € with VAT |
32x32 P20 - for steel |
On request
|
23,12 € with VAT |
32x32 P30 - for steel |
On request
|
23,12 € with VAT |
32x32 P45 - for steel |
On request
|
23,12 € with VAT |
32x32 K10 - for cast iron |
On request
|
16,06 € with VAT |
32x32 U10 - for INOX |
On request
|
23,12 € with VAT |
32x32 U30 - for INOX |
On request
|
23,12 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- DENAS
- Warranty:
- 24 months
Product information
Internal side / removal side turning knife with soldered blade
Knife size: (clamping height x width): according to the selected variant
Overall length: see product description for selected variant
Carbide: according to the selected variant
Carbide marking:
P - steel
K - cast iron
U - stainless steel, heat-resistant alloys
Carbide numbering:
05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface
10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface
20 - semi-roughing - clean turning
30 - roughing, interrupted cut
45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions
Use: according to the selected variant
Standard: ČSN 223724 / CSN 22 3724, DIN4973, DIN 4973R, ISO8
Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
Knife size: (clamping height x width): according to the selected variant
Overall length: see product description for selected variant
Carbide: according to the selected variant
Carbide marking:
P - steel
K - cast iron
U - stainless steel, heat-resistant alloys
Carbide numbering:
05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface
10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface
20 - semi-roughing - clean turning
30 - roughing, interrupted cut
45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions
Use: according to the selected variant
Standard: ČSN 223724 / CSN 22 3724, DIN4973, DIN 4973R, ISO8
Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
Variants
How do customers see us?
"vše bez problému a rychle"
"vše v pořádku, rychlé dodání a slušná cena"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!