Insert corner cutter for TP.. 1603 inserts , VERTEX

Variant:

Choose variant

50mm , 3-fl. / TP.. 1603	In stock (3x)	80,78 € with VAT
63mm , 4-fl. / TP.. 1603	On request	102,51 € with VAT

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

Brand:: VERTEX
Warranty:: 24 months

Product information

Front and corner milling head for replaceable inserts - VBD

Diameter: according to the selected variant
Number of blades: according to the selected variant
Type VBD - triangular positive: according to the selected variant (TPUN 2603 / TPKR 1603 / TPKN 1603 / TPCN 1603 / TPMN 1603)
Angle: 90°

The packaging is without VBD

It is a so-called peeling cutter - the plates do not have chip breakers - they are flat. Suitable for machining cast iron, or ordinary steel and, in an emergency, stainless steel (for stainless steel, use inserts with a chip breaker - type TPKR 2204, brand Iscar).

Variants

50mm , 3-fl. / TP.. 1603

Code: 6003-065

In stock

80,78 € with VAT

63mm , 4-fl. / TP.. 1603

Code: 6003-066

On request

102,51 € with VAT

Accessories

Interchangeable insert TPUN 160308 IC830, Iscar

Replacement Inserts VBD TPUN 160308 IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Cat. No .: 3308119

In stock

7,02 € with VAT
Replaceable insert TPKN 1603PPTR-42 IC328, Iscar

Milling insert VBD TPKN 1603PPTR-42 IC328 Coating: PVD, TiCN Series IC328: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type -42: Beveled edge -> plates are without radius. Longer plate life. Contact the Company: Kat. Ä. : 5601315 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

In stock

7,45 € with VAT
Replaceable insert TPKR 1603PPTR-HS IC328, Iscar

Milling insert VBD TPKR 1603PPTR-HS IC328 Coating: PVD, TiCN IC328 series: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type HS: Type with uneven / stepped blades for chip splitting and lower vibration. Contact the Company: Kat. Ä. : 5601306 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

In stock

9,79 € with VAT
Replaceable insert TPCN 1603OD-T; S20, POLDI DIADUR

Clearance sale

TPCN 1603 ODT / PDT / TPCN 1603 PDSN S20 Thickness: 03 (3.18mm) Angle Adjustment: P (90 °) Face Angle Angle: D (15 °) Cutting Edge Design: S (Rounded Edges with Facet) Feed Rate: N - Neutral - Feed Right & Left Material of slicer: S20 (uncoated) Application: Steel: P20-P30

In stock

2,41 € with VAT
Replaceable insert TPCN 1603PDTR 525P P25, PRAMET DIADUR - final sale

Clearance sale

Original Interchangeable Insert In Original Pack (Upon Taking 10pcs), According to ANSI Standard: TPCN 32PDTR Slightly Positive Face Angle Size: 16 Thickness: 03 (3.18mm) Angle of Adjustment: P (90 °) Angle of the Facet Back: D (15 °) Cutting Edge: T (Rounded Edges with Facet) Feed Rate: R - Feed Right | Slab Material: 525P Usage: Steel: P20-P30

In stock

3,97 € with VAT