FLT-3A flange for rotary table HV-12, HV-14, HV-16 and VUT-12
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000387735
- Warranty:
- 24 months
- Code:
- 1001-049
Product information
Diameter flanges: 210mm
Fitting mounting: 165mm
Other dimensions - see attached photo
Suitable for clamping lenses type: PIECE 200/3 M3 and VSC-8A.
After preparation suitable for clamping IUG 200/3 type chucks M2( twisting of mounting, drilling holes).
Accessories
-
Rotary table 350mm under the round milling machine, HV-14
Kvalitní otočný dělící stůl - dělička pod frézku 350 mm kruhový Horizontální i vertikální upnutí Po obvodu točny je stupnice 360°Drážky : 6x T16Osové výšky : Vertikální upnutí : 225mmVýška stolu : Horizontální upnutí : 123mmVertikální upnutí : 445mmMaximální přípustná zátěž stolu : Horizontální upnutí : 130kgVertikální upnutí : 70kgNonius : 1 otáčka = otočení o 4°1 dílek = 1´ (jedna minuta stupně)Maximální rozlišení : 20´´ (20 vteřin)Točnu i nonius je možno aretovat ve zvolené poloze.Uprostřed desky je středící otvor MK4. Spodní dosedací plocha je broušená, vybavena pro uložení středících kamenů.Obj. č. : 1001-005
In stock1.008,17 € with VAT -
Rotary table 300mm under the round milling machine, HV-12
High-quality rotary dividing table - 300 mm circular cutter Horizontal and vertical clamping 360 ° scale round the circumference of the turntable 6x T16 > Axis Height: Vertical Clamping: 194mm Table Height: Horizontal Clamping: 123mm Vertical Clamping: 388mm > Maximum permissible table load: Horizontal clamping: 120kg Vertical clamping: 60kg Nonius: 1 turn = 4 ° rotation 1 dots = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position. In the center of the plate is the centering hole MK4. The bottom bearing surface is ground, equipped for storing center stones. Shipping dimensions: (W x D x H) 45x58x26cm Art. No. 1001-004
In stock757,74 € with VAT -
Rotary table 400mm under the round milling machine, HV-16
High quality rotary dividing table - 400 mm circular cutter Horizontal and vertical clamps 360 ° scale round the circumference of the turntable > Axis Height: Vertical Clamping: 358mm Table Height: Horizontal Clamping: 128mm Vertical Clamping: 503mm > Maximum permissible table load: Horizontal clamping: 140kg Vertical clamping: 70kg Nonius: 1 turn = 4 ° rotation 1 dots = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position. In the center of the plate is the centering hole MK4. The bottom bearing surface is ground, equipped for storing center stones. Ref. No .: 1001-006
On request1.488,15 € with VAT -
Universal self-centering chuck TOS IUG 200 / 3-1 M2, ČSN 243809
Universal chuck IUG - TYPE 243809.0 200 / 3-1 M2 TOS Svitavy, TYPE 2438090203120 Diameter: 200mm Clamping: M2 Accuracy: "1" - superior < CSN 24 3809 / DIN 6350 / DIN 6350 CSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350 Chuck housing: Ductile iron Two universal jaw sets (1x internal and 1x outer) are supplied with the universal. clamping screws and loop Cutting surface function, clamping precision and extending chuck life - > Balanced spiral wheel reduces vibration at higher speed HEM ??160 mm F ± 0,2 176 mm G 3xM10 mm H 74 mm J 29 mm K 11 mm L 127,5 mm N 87,5 mm O 27.5 mm P 3 x 11 mm R 55 mm S 4 mm T 76 mm U 76 mm Also suitable for rotary tables HV-8 and larger.
In stock484,17 € with VAT -
Universal self-centering chuck KUS 200/3 M3, Kovonastroje
Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 200 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.
In stock255,13 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!