Drill chuck 1.5 - 10 mm with thread 1/2 - 20UNF with handle, ČSN 241320

Unfortunately, the product is no longer available

Show similar products

Interested in this product?

EAN:: 1000000058482
Warranty:: 24 months
Code:: 241320-015-100-1/2-20UNF

Product information

Metal drill head with handle, up to 10mm drill bit

Clamping range: 1,5-10mm
Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12,7mm )

Body Diameter: 34mm
Overall height: 48 / 59mm

ČSN 241320 / CSN 24 1320

Application: Narex Drills and others. If you change the chuck, look at the body of the existing chuck where the clamping thread should be.

Variants

1,5-10,0 mm - UNF 3/8"

Code: 241320-015-100-3/8-24UNF

On request

2,71 € with VAT

1,5-13,0 mm - UNF 1/2"

Code: 241320-015-130-1/2-20UNF

In stock

4,49 € with VAT

1,5-13,0 mm - UNF 3/8"

Code: 241320-015-130-3/8-24UNF

In stock

4,49 € with VAT

3,0-16,0 mm - UNF 1/2"

Code: 241320-030-160-1/2-20UNF

In stock

6,23 € with VAT

3,0-16,0 mm - UNF 5/8"

Code: 241320-030-160-5/8-16UNF

In stock

6,15 € with VAT

1,5-10 mm - M14x2,0

Code: 241320-015-100-M14x2,0

On request

10,65 € with VAT

3,0-16,0 mm - M16x1,5

Code: 241320-030-160-M16x1,5

On request

14,04 € with VAT

3,0-16,0 mm - M18x2,5

Code: 241320-030-160-M18x2,5

In stock

14,04 € with VAT

3,0-16,0 mm - M18x1,5

Code: 241320-030-160-M18x1,5

On request

14,04 € with VAT

3,0-16,0 mm - M18x1,0

Code: 241320-030-160-M18x1,0

In stock

14,04 € with VAT

Show all variants

Accessories

Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK2 taper - for clamping in the milli

Milling spindle for clamping internal thread drill chucks. MK2 Cone 10mm Conical Thread For Clamping 1/2 "20UNF Female Thread Chucks

In stock

7,88 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK3 taper - for clamping in the milli

Milling spindle for clamping internal thread drill chucks. MK3 Cone 12mm Taper Inner Thread For Clamping 1/2 "20UNF Female Thread Chucks

In stock

8,12 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK2 taper

MK2 Cone Thread Type: UNF Number of strokes per inch: 20

In stock

7,19 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK3 taper

MK3 Cone Thread Type: UNF Number of strokes per inch: 20

In stock

7,47 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK1 taper

Drilling spindle for heads with 1/2 "clamping thread - 20 UNF (1/2" -20 UNF)

In stock

6,90 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK4 taper

MK4 Cone Thread Type: UNF Number of strokes per inch: 20

In stock

8,16 € with VAT

Choose variant