Corrosion protection IX 100 500ml, Brunox

Protective agent for stabilization - corrosion protection with extra long-term effect.

Strongly holding, hardening. It dries after 1-2 hours, hardens after 12 hours.
Heat resistance up to 80A ‚Â ° C
Repels moisture and salt water

Use and action:
* As protection against corrosion during storage outdoors or sea transport.
* For shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, equipment eho kind.
* Suitable where chrome plating, galvanizing, etc. are not possible.

It is applied on a clean dry surface, if the surface is a bit damp, we recommend use Brunox Turbo Spray beforehand - spray it into all cavities and corners so that the moisture disappears. Any water will drop into drops, then wipe the set with a cloth and apply IX 100.
The applied layer should be at least 20um thick. The ideal is a dry layer of 50um, which you will achieve when applying 125um of IX100(even at a consumption of 0.63l / m2).

Disposal of preparation IX 100:
With varnish or cleaning gasoline or with the help of a high-pressure cleaner and a solution from surfactants.