/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage ...
Clamping tools
Clamps for milling
Collet Morse ER clamps Collet ER clamp with morse taper

Collet ER clamp with morse taper
Variant:
MK1 x ER16
In stock (4x)
25,30 € with VAT
MK2 x ER16
On request
29,84 € with VAT
MK2 x ER20 , mini nut
In stock (5x)
29,84 € with VAT
MK2 x ER20
In stock (4x)
24,22 € with VAT
MK2 x ER32
In stock (1x)
37,44 € with VAT
MK3 x ER16 , mini nut
In stock (10x)
34,68 € with VAT
MK3 x ER20
In stock (4x)
34,68 € with VAT
MK4 x ER20 , mini nut
In stock (10x)
29,68 € with VAT
MK4 x ER25 , mini nut
In stock (15x)
36,09 € with VAT
MK5 x ER40
On request
45,10 € with VAT

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

Warranty:
24 months

Product information

Morse taper collet clamp

Morse cone: according to the selected variant
For ER type collets: according to the selected variant
Performance of the ER matrix: according to the selected variant

Other dimensions - see product description for individual variants

Usage :
Suitable for all new spindles where the tools are driven only by the internal thread.
This type is not suitable for older Czech spindles, which have a so-called "house" - through which the tools (except the thread) drift.

Procedure for clamping the collet:
Snap the collet into the clamping nut - according to the attached picture.

Standard: DIN228A

Variants

MK1 x ER16
Code: MK1-ER16-A
In stock
25,30 € with VAT
MK2 x ER16
Code: MK2-ER16-T1
On request
29,84 € with VAT
MK2 x ER20 , mini nut
Code: MK2-ER20-M
In stock
29,84 € with VAT
MK2 x ER20
Code: MK2-ER20-T1
In stock
24,22 € with VAT
MK2 x ER32
Code: MK2-ER32
In stock
37,44 € with VAT
MK3 x ER16 , mini nut
Code: MK3-ER16-M
In stock
34,68 € with VAT
MK3 x ER20
Code: MK3-ER20-T1
In stock
34,68 € with VAT
MK4 x ER20 , mini nut
Code: MK4-ER20-M
In stock
29,68 € with VAT
MK4 x ER25 , mini nut
Code: MK4-ER25-M
In stock
36,09 € with VAT
MK5 x ER40
Code: MK5-ER40
On request
45,10 € with VAT
Show all variants

Accessories

  • Precision ER11 collet , DIN6499B / 4008E

    Precision ER11 collet , DIN6499B / 4008E

    Clamping collet series: ER 11 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 4008E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 11mm Length: 18mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    8,37 € with VAT

  • Precision ER16 collet , DIN6499B / 426E

    Precision ER16 collet , DIN6499B / 426E

    Clamping collet series: ER 16 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 426E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    7,16 € with VAT

  • Precision ER32 collet , DIN6499B / 470E

    Precision ER32 collet , DIN6499B / 470E

    Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    8,25 € with VAT

  • Precision ER20 collet , DIN6499B / 428E

    Precision ER20 collet , DIN6499B / 428E

    Clamping collet series: ER 20 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 428E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 20mm Length: 32mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    7,76 € with VAT

  • Precision ER25 collet , DIN6499B / 430E

    Precision ER25 collet , DIN6499B / 430E

    Clamping collet series: ER 25 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 430E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    7,16 € with VAT

  • Precision ER50 collet , DIN6499B / 477E

    Precision ER50 collet , DIN6499B / 477E

    Clamping collet series: ER 50 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.020mm up to a diameter of 30mm (including) Clamping accuracy: 0.030mm over a diameter of 30mm Standard: DIN 6499B / 477E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 50mm Length: 60mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    from 20,33 € with VAT

  • Precision ER40 collet , DIN6499B / 472E

    Precision ER40 collet , DIN6499B / 472E

    Clamping collet series: ER 40 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 472E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 40mm Length: 46mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    9,64 € with VAT

Alternatives

  • Collet ER clamp with morse taper for Czech spindles, securing with a drift nut

    Collet ER clamp with morse taper for Czech spindles, securing with a drift nut

    Morse taper collet clamp - for Czech spindles Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that carry tools through this nut + thread. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 30,89 € with VAT

Do you need advice?

Jakub Novák, Orders

How do customers see us?

Certified customer, 30.April 2024
Široký sortiment Dobrá cena Rychlá doprava
"DOPORUČUJI!"
Certified customer, 30.April 2024
Kvalitni zbozi Rychle dodani Poradenstvi Dobre ceny
"Nakupovali jsme jiz nekolikrat, vzdy maximalni spokojenost s kvalitou, komunikaci obchodu a peclive zabalenym zbozim. Jsme verni zakaznici, v obchode budeme nakupovat i nadale."

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!