Collet chuck HSK A63xER40-80 DIN69893 A balanced G2.5/30000 rpm

Current price:

70,83 € with VAT

58,54 € without VAT

In stock (10x)

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:: 1000005353445
Warranty:: 24 months
Code:: HSK-A063xER40-080

Product information

NC collet holder HSK A 63 ER 40 - 80 mm

Type: HSK A63 ER32 AD - cooling guided through the center

Length from cone to holder: 80 mm
Max. collet size: 30mm
For collets with an outer diameter: 40mm
Clamping nut diameter: 63mm
Clamping stem design for aut. replacement: DIN69893 A
ER32 collets can be purchased additionally.
Throwability: up to 0.005mm
Balance: G2.5 / 20,000 rpm.

Standard: DIN 69893
The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

Accessories

Socket wrench for ER32 collet chuck

ER 32 UM / T2

In stock

11,46 € with VAT

Choose variant
Hook wrench for collet chuck ER32(45-52mm)

Hook clamp for collet chuck Application: For loosening and tightening clamping nuts ER 32 Size: 45-52mm

In stock

6,56 € with VAT

Choose variant
Sealed ER32 collet , DIN6499C / 470EA

Precise collet ER 32 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

22,77 € with VAT

Choose variant
Sealed ER32 collet with cooling channels along the bore , DIN6499C / 470ECC

Precision collet ER 32 with two cooling channels in the middle / at the drilling - for drills and milling cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470ECC Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

31,56 € with VAT

Choose variant
Tapping ER32 collet with square drive , DIN6499A

Clamping collet with internal square ER 32 / GER 32 / GER32 series for taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

24,48 € with VAT

Choose variant
Precision ER32 collet , accuracy 0.005mm , DIN6499B+ UP / 470EP

Clamping collet series: ER 32 with higher clamping accuracy Size: 3 mm Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 470EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

15,32 € with VAT

Choose variant
Precision ER32 collet , DIN6499B / 470E

Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

8,40 € with VAT

Choose variant
Sealed ER32 tapping collet with square drive , DIN6499A

Sealed ER 32 / GER 32 / GER32 series inner square collet for machine taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A + DIN 6499 B, ISO 15488 A + ISO 15488 B Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

29,52 € with VAT

Choose variant