1.5-13mm chuck and adapter for clamping tools in LC2564 and 00930/1 taps

Tool for cutting threads / machine beam for taps and threaded round jaws Clamping shank: taper MK2 Designed for cutting external and internal threads This is a practical and ready- made tool for cutting threads on a lathe. The tool consists of a cylindrical mandrel with an MK2 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm, adapters for taps M3-M8 and M5-M12. The set also includes a retaining rod for catching the reaction Dimensions: Total length including clamping shank: 155- 170mm(according to the inserted case) Clamping shank: conical, MK2(morse 2) Maximum extension / step: 50mm The fixture can be purchased separately drill chuck - see related products.

Tool for cutting threads / machine beam on threaded round jaws after purchase of adapter and for taps(see related products) Clamping shank: taper MK3 Designed for cutting external threads This is a practical and ready-to-use tool for cutting teeth Win on the lathe. The tool consists of a cylindrical mandrel with an MK3 shank and sleeves for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm The set also includes a retaining rod for capturing the reaction Dimensions: Total length including clamping shank: 155-170mm(accessible to the housing) Clamping shank: conical, MK3(morse 3) Maximum extension / step: 50mm b> An adapter for clamping M3-M8 and M5-M12 taps and a drill chuck can be purchased separately for the jig - see related products.

Tool for cutting threads on a small lathe Clamping shank 12mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 12mm, shank length 24mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)

Tool for cutting threads / machine beam on threaded round jaws after purchase of adapter and for taps(see related products) Clamping shank: taper MK2 Designed for cutting external threads This is a practical and ready-made tool for cutting teeth Win on the lathe. The tool consists of a cylindrical mandrel with an MK2 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm The set also includes a retaining rod for catching the reaction Dimensions: Total length including clamping shank: 155-170mm(accessible to the housing) Clamping shank: conical, MK2(morse 2) Maximum extension / step: 50mm K An adapter for clamping M3-M8 and M5-M12 taps and a drill chuck can be purchased separately - see related products.

Tool for cutting taps / machine beam for threaded round jaws both for taps(up to M12) and for taps(see related products) Clamping shank: taper MK3 Designed for cutting external threads This is a practical and ready-made tool for cutting The thread on the lathe. The tool consists of a cylindrical mandrel with an MK3 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm As part of this set we also supply a glass for M3 -8 and M5-12 taps The set also includes a retainer Reaction catch rod Dimensions: Total length including clamping shank: 155-170mm(according to the inserted case) Clamping shank: conical, MK3(morse 3) Maximum extension / step: 50mm Replacement tapers for taps can be purchased separately - see.related products.