Threading machine M3-M12, ISO 40 with length compensation for TC-312 with torque coupling,
Product information
Clamping shank: Straight ISO40
< br> Standard: DIN69871
Clamping kit sets:
DIN 371 (reinforced shank): M3; M4; M4.5; M5; M6; M7; M8; M10
DIN 376 (classical shank): M4,5; M5; M6; M8; M12
Length compensation - see photo no.3, no.4 and no.12
The set is delivered in the trunk - see photo 9 and no.10
Taper clamping method:
The taps are secured in the extension behind the square and the shank.
The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension.
Extensions are secured in the head via a bearing and stones - see photo no.5 and no.6
Expansion of the attachment see photo no.7 and no.8
You can buy the set Taps for M1 - M16 taps - see photo n ° 11
Taps for taps manufactured according to JIS and ISO 529 standards, which are not common in our country, are also available for tapping heads.
About 90% of the domestic market consists of taps made to DIN standards
Taps are not a part of the set!
The tap is clamped into a suitable TC312 collet which has a pre-set torque clutch or can be fine-tuned as needed.
Screwdriver has a length compensation of approx. 0.5cm, so it is sufficient to programmatically adjust the cutting depth. The torque clutch eventually prevents the tilting of the tap.
Accessories
-
TC-312 / GT-12 tapping adapter for machine taps
Quick release attachment / sleeve / insert / collet TC312 / GT12 with slip for machine taps The attachment clamps taps: DIN 371 (reinforced shank): see attached table DIN 376 (classic shank): see attached table Dimensions of the clamping part (insertion into the clamp - see 2nd photo) - the radius stones are 10mm wide, 4mm high and the wall thickness is 3mm. Method of clamping the tap: The taps are secured in the extension by a square and a clamping shank. The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension. Features : The tap is clamped in a suitable collet TC312, which has a torque coupling already preset, or it can be fine-tuned as needed. This insert fits into a thread cutter - see related products. Cannot be used alone.
from 34,46 € with VAT -
Round die adapter TC-312/TC-820
Quick release attachment / sleeve / insert / collet for circular jaw / threaded eye The attachment clamps round jaws with an outer diameter: according to the selected variant Insert size: according to the selected variant Other dimensions - see product description for individual variants Dimensions of inserts: TC-312: radius stones are 10mm wide, 4mm high and wall thickness is 3mm. Outer / inner diameter of stones: 25.4mm / 19mm. TC-820: radius stones are 11mm wide, 5mm high and wall thickness is 4mm. Outer / inner diameter of stones: 39.5mm / 31mm. This insert fits into a thread cutter - see related products. We do not recommend using it alone.
from 35,62 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!