Search results for: sklíčidlo házivost do 0,06
We have also found these products for you:
-
Analog depth gauge 200mm 0.02mm with mounting holes and fine adjustment 1249-2001, Insize
Analogue depth gauge without nose with mounting holes for expanding base and fine adjustment Measuring range: 0-200mm Resolution: 0,02mm Base length: 100mm Accuracy: 0,05mm Standard: DIN862 Material: stainless steel / INOX It is possible to buy an expanding base for the depth gauge - Series 6141
On request70,63 € with VAT -
Machine tap M8x1,0 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 8x1,0 with breaker for chips, straight groove 8x1,0 FAN Pitch: 1,0, fine Fitting: ISO2 / 6H - grinding profile thread Standard: DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Speed ??â € ‹â €‹ Cutter Steel! Steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened  © steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 3.4: Ball and te mpered Â! Cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 40 0N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex , A… â „cada 3580
On request24,64 € with VAT -
Machine tap M12x1,0 HSSE PM HL ISO2(6HX) DIN374 spiral (45°) MasterTap, FANAR
Machine spiral tap(high speed) M 12x1,0 R45 PM in helix Pitch: 1,0, fine Fitting: ISO2 / 6H - grinder Thread profile Standard: DIN 374 Thread start: C, 2 turns - see attached photo Material: HSSE-PM(High speed cutting) Â!Steel 5 coating, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels , cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies for piece cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request43,48 € with VAT -
Machine tap M8x1,0 HSSE PM HL ISO2(6HX) DIN371 spiral (45°) MasterTap, FANAR
Machine spiral tap(high speed) M 8 R45 PM in helix 8x1,0 Pitch: 1,0, fine Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 < br> Thread start: C, 2 turns - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency even for piece cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request32,48 € with VAT -
Machine tap M10x1,0 HSSE PM HL ISO2(6HX) DIN371 spiral (45°) MasterTap, FANAR
Machine spiral tap(high speed) M 10 R45 PM in helix 10x1,0 Pitch: 1,0, fine Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 < br> Thread start: C, 2 turns - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency even for piece cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request33,65 € with VAT -
Machine tap M8x1,0 HSSE-PMS 1400 TiAlSiN ISO2(6H) DIN374 C spiral (15°), FANAR
Recommended ✓Machine spiral tap(high speed) M 8x1,0 R15 PMS 1400 in helix 8x1,0 Pitch: 1,0, fine Fitting: ISO2 / 6H - ground thread profile Standard: DIN 374 Thread start: C, 2 turns - see attached photo Material: HSSE-PM(High-speed steel 5 wrap, sintering) Thread grinding profile Coating: TiAlSiN Helix angle: 15 Â ° C Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(copper-zinc steel with short cutting board) 4.9: Copper alloys with leather tkou tA… Af Afskou
On request25,10 € with VAT -
Machine tap M24x2,0 HSSE-PMS 1400 TiAlSiN ISO2(6H) DIN374 C spiral (15°), FANAR
Recommended ✓Machine spiral tap(high speed) M 24x2,0 R15 PMS 1400 in helix 24x2,0 Pitch: 2,0, fine Fitting: ISO2 / 6H - ground thread profile Standard: DIN 374 Thread start: C, 2 turns - see attached photo Material: HSSE-PM(High-speed steel 5 coating, sintering) Thread grinding profile Coating: TiAlSiN Helix angle: 15 Â ° C Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(copper-zinc steel with short cutting board) 4.9: Copper alloys with leather tkou tA… Af Afskou
In stock137,60 € with VAT -
Machine tap M16x1,0 HSSE PM-FAN TiAlSiN ISO3(6G) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 16 with breaker for chip, straight groove 16x1,0 FAN Ascent: 1,0, fine Fit: ISO3 / 6G - grinding profile thread - loose thread - under zinc Standard: DIN 374 Thread thread: B, 4 courses - see enclosed photo Material: HSSE-PM( High speed steel 5% Cobalt, production baking) Grinding profile thread Color marks en: Red Strip Coating: TiAlSiN Application: 1.4: Alloyed steel, tool steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic Â! A martensitic stainless steel steel up to 1000N / mm2 2.3: heat-resistant corrosion-resistant steel up to 1100N / mm2 3.3 : Ball a malleable cas t iron up to 700N / mm2 3.4: Ball a malleable cast iron up to 1000N / mm2 1.3: Structural a carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / m m2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech tap N @ rex, Series 1580
On request75,09 € with VAT -
Machine tap M16x1,0 HSSE PM HL ISO2(6HX) DIN374 spiral (45°) MasterTap, FANAR
Machine spiral tap(high speed) M 16x1,0 R45 PM in helix Pitch: 1,0, fine Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 374 Thread start: C, 2 turns - see attached photo Material: HSSE-PM(High speed cutting) Â!Steel 5 coating, baking production) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies for piece cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request69,66 € with VAT -
Machine tap M42x3,0 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 42 with breaker for chisels, straight groove 42x3,0 FAN Pitch: 3,0, fine Fitting: ISO2 / 6H - grinding profile thread Norma : DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Speed ??â € ‹â €‹ Cut steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: heat-resistant corrosion-resistant Steel! Steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 3.4: Ball and tempere d cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 < br> 7.4: Aluminum aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â „ Series 3580
On request513,95 € with VAT -
Set of needle files 160mm SEK 0 in a case with a handle, Ajax
Professional set of needle files with handle / hand Grain size: SEK 0(coarse) Length of files: 160mm Set contains 6pcs files: flat , four-sided, three-sided, round, circular, knife Files are suitable for engravers, locksmiths, watchmakers, etc. for fine sawing of small areas.
In stock26,26 € with VAT -
Set of needle files 180mm SEK 0 in a case with a handle, Ajax
Professional set of needle files with handle / hand Grain size: SEK 0(coarse) Length of files: 180mm Set contains 6pcs files: flat , four-sided, three-sided, round, circular, knife Files are suitable for engravers, locksmiths, watchmakers, etc. for fine sawing of small areas.
In stock27,44 € with VAT
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!