Search results for: sklíčidlo házivost do 0,06
We have also found these products for you:
-
Thread measuring wires 1.35 mm for micrometer with 8.0 mm shaft, Schut
Set of measuring wires for measuring threads Wire diameter: 1,35mm Hole on the shaft micrometer: 8mm With these wires it is possible to measure the following threads: Metric - with pitch: 2,0 mm Inch UN / UNC / UNF - with the number of walks per inch: 11 and 12 Inch BSW / BSF - with the number of walks per inch: 11 and 12 Load: 0,001mm Cat. Number: 834.291
On request247,75 € with VAT -
Digital dial indicator - indicator 60 / 12.7 x 0.01mm Bluetooth, KMITEX
Digital Dial Indicator Dial with PROFESIONAL Data Output: Diameter: 60mm Accuracy: 0.03mm Maximum Feed Rate 0.3m / s Battery: CR2032 Working temperature: 0-40 ° C Each indicator has its unique serial number - we recommend it for calibration!
On request145,62 € with VAT -
Digital dial indicator - indicator 60 / 12.7 x 0.001mm Bluetooth, KMITEX
Digital Dial Indicator Dial with PROFESIONAL Data Output: Diameter: 60mm Maximum Feed Rate 0.3m / s Battery: CR2032 Working temperature: 0-40 ° C Each indicator has its unique serial number - we recommend it for calibration!
On request228,07 € with VAT -
Machine tap M20x2,0 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 20 with breaker for chisels, straight groove 20x2,0 FAN Pitch: 2,0, fine Fitting: ISO2 / 6H - grinding profile thread Norma : DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Speed ??â € ‹â €‹ Cut steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: heat-resistant corrosion-resistant Steel! Steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 3.4: Ball and tempere d cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â "35 ada 3580
On request98,16 € with VAT -
Machine tap M24x2,0 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 24 with breaker for chisels, straight groove 24x2,0 FAN Pitch: 2,0, fine Fitting: ISO2 / 6H - grinding profile thread Norma : DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Speed ??â € ‹â €‹ Cut steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: heat-resistant corrosion-resistant Steel! Steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 3.4: Ball and tempere d cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â "35 ada 3580
On request108,65 € with VAT -
Machine tap M27x2,0 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 27 with breaker for chisels, straight groove 27x2,0 FAN Pitch: 2,0, fine Fitting: ISO2 / 6H - grinding profile thread Norma : DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Speed ??â € ‹â €‹ Cut steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: heat-resistant corrosion-resistant Steel! Steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 3.4: Ball and tempere d cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â "35 ada 3580
On request159,01 € with VAT -
SK cutter dia. 16.0 mm 4br. for chamfering 90° AlTiN, type N, Ceranite
Carbide Edge Cutter / Sintered Carbide Cutter Number of Cuts: 4pcs. Diameter of working part: 16mm, tolerance h6 Peak angle: 90 ° Minimum precipitation diameter: Dc: 4,0mm Overall length: 100mm Helix angle: 0 ° < Front clamp angle: 0 ° Clamping shank: 16mm, tolerance h6 DIN 6535 HA Carbide: K30 F - ultra fine grain carbide, high hardness and durability against abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD (AlTiN) Application: Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Fine cast iron Refractory steels alloyed Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see enclosed photo Ref. No .: 36.1600.90
In stock72,01 € with VAT -
Drill chuck 0.3 - 4 mm with cone JT0 with mandrel handle MK1
Metal drill head with handle and cut jaws, up to 4mm drill bit Cutting jaws Chuck precision: 0,18mm Drill bits: 0,3-4mm, cone JT0 thorn MK1 Supplied with MK1 thorn Body Diameter: 22mm, Overall Head Height 29 / 36mm Hole Diameter for Loop: 3mm CSN 241320 / CSN 24 1320
On request17,76 € with VAT
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!