Quick-clamp drill chuck 1 - 13 mm B16 PROFI, runout up to 0.06 mm

Drill chuck for drill chuck / Chuck drill chuck with cylindrical shank Cone for head: B 16 Cone dimension B16: Larger diameter 16mm, smaller diameter 14,7mm Clamping shank: Cylindrical shank, diameter 20mm

Drill chuck for drill chuck / Chuck drill chuck with cylindrical shank Cone for head: B 16 Cone dimension B16: Larger diameter 16mm, smaller diameter 14,7mm Clamping shank: Cylindrical shank, diameter 16mm

Drilling spindle for chuck chuck, B16, morse cone MK4 B 16 = Cone which is inserted into the head. Dimensions: Bigger Diameter 16, Lower Diameter 14.7mm Cone MK 4 = Cone that slides into the drill. Larger diameter 31,6, smaller diameter 27mm CSN 241329 / CSN 24 1329

Drilling spindle for chuck chuck, B16, morse cone MK2 B 16 = cone which is inserted into the head. Dimensions: Larger diameter 16mm, smaller diameter 14,7mm Cone MK 2 = cone that is inserted into the drill. Greater diameter 18, smaller diameter 14,6mm CSN 241329 / CSN 24 1329

Drilling spindle for chuck chuck, B16, morse cone MK3 B 16 = Cone which is inserted into the head. Dimensions: Larger diameter 16mm, smaller diameter 14,7mm Cone MK 3 = Cone which is inserted into the drill. Larger diameter 24,1mm, smaller diameter 20,3mm ČSN 241329 / CSN 24 1329

Drilling spindle for chuck chuck, B16, morse cone MK1 B 16 = cone that plugs into the head. Dimensions: Larger diameter 16mm, smaller diameter 14,7mm Cone MK 1 = cone that is inserted into the drill. Larger diameter 12,2mm, smaller diameter 9,5mm ČSN 241329 / CSN 24 1329

Milling Cutter for Clamping Drill Chucks M12 Clamping Morse Taper MK 3 Cone for Head B16

Clamping reduction - insert ISO40 x B 16 for automatic exchange Cone: ISO40, thread M16 Cone for clamping the drill chuck: B16 Standard: DIN 69871-A Balance: G2.5 / 25,000 rpm

Milling Cutter for Clamping Drill Chucks with Thread M 16 Clamping Morse Taper MK 4 Cone for Head B16

Milling Cutter for Clamping Drill Chucks with M 10 Thread Clamping Morse Taper MK 2 Cone for Head B16

Clamp Reduction - ISO40 x B 16 Insert ISO 40, M16 Thread DIN 2080

Clamp reduction - insert ISO30 x B 16 Cone: ISO30, M12 thread DIN 2080

Drill chuck for drill chuck / Chuck drill chuck with cylindrical shank Cone for head: B 16 Cone dimension B16: Larger diameter 16mm, smaller diameter 14,7mm Clamping shank: Cylindrical shank, diameter 18mm

Clamp Reduction - ISO30 x B 16 Insert for Automatic Replacement Cone: ISO30, M12 Thread B16 Standard: MAS BT / JIS 6339 B

Clamp Reduction - ISO30 x B 16 Insert for Automatic Replacement Cone: ISO30, M12 Thread Clamping Clamp Cone: B16 DIN 69871-A

Drill chuck for cone chuck B16 Diameter of chuck part is 24mm. Taper Cone: R8 Internal Thread: 7/16 "-20 UNF Overall Length: 134mm Cone Length B16: 24mm Cylinder Stopper with 73mm Groove < br> Suitable for American BridgePort machines

Right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Edge angle: 128 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 25-30 ° Material: HSSE - High speed steel + Co8 Standard: DIN338 (replaces PN 2906 / PN2906) Usage: General - hand, stand, column drills Titanium alloys Austenic steels resistant to corrosion, acids and heat High-strength and low-tensile steels with tensile strength up to 1200MPa Hardox 450 and Hardox 500 Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile. * Possibility of delivery with TiN or TiAlN coating.

Right-handed ground spiral cobalt drill for stainless steel with reinforced core and cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 130 ° Helix angle: 36 ° Material: HSSE - High speed steel + Co5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile.

Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze

Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

Clamp Reduction - ISO40 x B 16 Insert for Automatic Replacement Cone: ISO40, M16 Thread MAS BT / JIS 6339 B

Clamp Reduction - ISO50 x B 16 Insert ISO 50, M24 Thread DIN 2080

Drill chuck for drill chuck / Chuck drill chuck with cylindrical shank Cone for head: B 16 Cone dimension B16: Larger diameter 16mm, smaller diameter 14,7mm Clamping shank: Cylindrical shank, diameter 10mm

Drilling spindle for chuck chuck, B16, morse cone MK5 B 16 = cone which is inserted into the head. Dimensions: Larger Diameter 16, Lower Diameter 14.7mm Cone MK 5 = Cone that slides into the drill. Larger diameter 44,7, smaller diameter 38,3mm ČSN 241329 / CSN 24 1329

Hook wrench with tooth for quick-release chuck The chuck for which the key is intended can be found in the related products. The key may not fit chucks from other suppliers/manufacturers.