Quick-clamp drill chuck 0.5 - 6 mm B10 PROFI, runout up to 0.06 mm

Milling Cutter for Clamping Drill Chucks M 16 Clamping Morse Taper MK 4 Cone for Head B10

Milling cutter for clamping drill chuck M12 Clamping Morse cone MK 3 Cone for head B10

Clamp Reduction - ISO30 x B 10 Insert for Automatic Replacement Cone: ISO30, M12 Thread B12: 60mm Standard: MAS BT / JIS 6339 B

Drilling spindle for chuck chuck, B10, morse cone MK0 B 10 = cone that is inserted into the head. Dimensions: Larger diameter 10,2mm, smaller diameter 9,5mm Cone MK 0 = Cone that is inserted into the drill. Slovak standards - ČSN 241329 / CSN 24 1329

Drilling spindle for chuck chuck, B10, morse cone MK4 B 10 = Cone which is inserted into the head. Dimensions: bigger diameter 10,2mm, smaller diameter 9,5mm Cone MK 4 = cone, which is inserted into the drill. Larger diameter 31,6mm, smaller diameter 27mm ČSN 241329 / CSN 24 1329

Drilling spindle for chuck chuck, B10, morse cone MK3 B 10 = Cone that is inserted into the head. Dimensions: bigger diameter 10,2mm, smaller diameter 9,5mm Cone MK 3 = cone that is inserted into the drill. Larger diameter 24,1mm, smaller diameter 20,3mm ČSN 241329 / CSN 24 1329

Milling Cutter for Clamping Drill Chucks M 10 Clamping Morse Taper MK 2 Cone for Head B10

Drilling mandrel for chuck chuck, B10, morse cone MK1 B 10 = Cone that is inserted into the head. Dimensions: Larger diameter 10,2mm, smaller diameter 9,5mm Cone MK 1 = Cone which is inserted into the drill. Larger diameter 12,2mm, smaller diameter 9,5mm ČSN 241329 / CSN 24 1329

Drilling spindle for chuck chuck, B10, morse cone MK2 B 10 = Cone that plugs into the head. Dimensions: Larger diameter 10,2mm, smaller diameter 9,5mm Cone MK 2 = Cone that is inserted into the drill. Larger diameter 18mm, smaller diameter 14,6mm ČSN 241329 / CSN 24 1329

Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze

Right-handed ground spiral cobalt drill for stainless steel with reinforced core and cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 130 ° Helix angle: 36 ° Material: HSSE - High speed steel + Co5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile.

Right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Edge angle: 128 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 25-30 ° Material: HSSE - High speed steel + Co8 Standard: DIN338 (replaces PN 2906 / PN2906) Usage: General - hand, stand, column drills Titanium alloys Austenic steels resistant to corrosion, acids and heat High-strength and low-tensile steels with tensile strength up to 1200MPa Hardox 450 and Hardox 500 Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile. * Possibility of delivery with TiN or TiAlN coating.