Machine needle 2-18mm 90° D10 outer edges, KOPAL
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000338003
- Brand:
- KOPAL (Francie)
- Warranty:
- 24 months
- Code:
- KO-02-010
Product information
Range: 4-17mm
Bevel angle: 90 °
Number of strokes : 1pc
Clamping shank: cylindrical dia. 10mm
The coaster is delivered without a run , these can be purchased with a sharp angle:
a ) 0Â °(kat. Ä. 02-304), suitable for brass, bronze, cast iron, heat-resistant steel
b) 14Â °(cat. Ä. 02-300), suitable for special bronze, plexiglass
c) 20Â °(cat. Ä. 02-302), suitable for ordinary steel, copper, plastics, stainless steel
d) 20 ° TiN(cat. Ä. 2T300B), suitable for ordinary steel, stainless steel, inconel, titanium
e) 25Â °(kat. Ä. 02-306), suitable for aluminum, iron, sheets
Dimensions of the needle:
Total length: 80mm
Diameter Front parts: 18mm
Diameter of aluminum nuts: 26mm
Clamping shank length: 27mm
Blade insertion procedure and adjustment needling / chamfering heights
1) Loosen both worms on the body of the needler and remove the aluminum and black nuts. Be careful that you do not lose the spring, it is free.
2) Put the body in the body, secure it with two worms and reassemble the whole needle. Tighten the worms on the body and loosen them by about a quarter to a half turn to maintain the function of the spring.
3) Adjust the height of the chamfer by tightening the aluminum nut - tightening = less chamfering, loosening = more chamfering.
4) Make sure that the runner is not drowned in the body of the needle, if so, rearrange the aluminum nut and adjust it so that it runs out.
5) Always have a black versus mother attached to an aluminum mother.
Accessories
-
90° HSS blade for needlers with 2-36mm range with 20° undercut, KOPAL
Run for 90 ° machine needle 02-010 by KOPAL. Shrinkage angle: 90 ° Podbrus blade: 20 ° Material: HSS Coating: uncoated Usage: suitable for Stainless steel, swords, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-302
In stock55,41 € with VAT -
90° blade HSSTiN for needler 02-010 with undercut 20°, KOPAL
Run for machine needle 02-010 brand KOPAL. Shrinkage angle: 90 ° Podbrus blade: 20 ° Material: HSS Coating: TiN Usage: suitable for running Stainless steel, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Contact the Company: Kat. Ä. : 2T300B
In stock69,07 € with VAT -
90° HSS blade for needles with 2-36mm range with 14° undercut, KOPAL
Run for 90 ° machine needle 02-010 by KOPAL. Shrink angle: 90 ° Podbrus blade: 14 ° Material: HSS Coating: uncoated Bronze, plexiglass You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-300
In stock55,41 € with VAT -
90° HSS blade for needlers with 2-36mm range with 25° undercut, KOPAL
Run for 90 ° machine needle 02-010 by KOPAL. Shrinkage angle: 90 ° Podbrus blade: 25 ° Material: HSS Coating: uncoated , Iron, Sheets You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-306
In stock55,41 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!