Machine needle 2-18mm 60° MK1 outer edges, KOPAL
Current price:
200,33 €
with VAT
165,56 € without VAT
On request
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000431445
- Brand:
- KOPAL (Francie)
- Warranty:
- 24 months
- Code:
- KO-02-025
Product information
Machine chuck for external edges / machine needle
Range: 4-17mm
Bevel angle: 60 Â ° Â ° Number of strokes: 1pc
Clamping shank: MK1(morse 1)
blade:
a) 0 Â °(cat. no. 02-303), suitable for brass, bronze, cast iron, heat-resistant steel
b) 14 Â °(cat. no. No. 02-305), suitable for special bronze, plexiglass
c) 20 Â °(cat. No. 02-308), suitable for ordinary steel, copper, plastics, stainless steel
d) 20 Â ° TiN(cat. no. 2T305B), suitable for ordinary steel, stainless steel, inconel, titanium
e) 25 Â ° Â °(cat. no. 02-307), suitable for aluminum, iron, sheets
Dimensions of the needle:
Total length: 80mm
Diameter of the front Parts: 18mm
Diameter of aluminum nuts: 26mm
Shank length: 27mm
How to insert the blade and adjust the height of the needles / chamfering
1) Loosen both worms on the body of the drawbar and remove the aluminum and black nuts. Be careful that you do not lose the spring, it is free.
2) Insert the body into the body, secure it with two worms and reassemble the whole needle. Tighten the worms on the body and loosen them by about a quarter to a half turn to maintain the function of the spring.
3) Adjust the chamfer height by tightening the aluminum nut - tightening = less chamfering, loosening = more chamfering.
4) Make sure that the runner is not drowned in the body of the needle, if so, rearrange the aluminum nut and check so that the runner protrudes.
5) Always have the black counter mother tightened to the aluminum mother.
Range: 4-17mm
Bevel angle: 60 Â ° Â ° Number of strokes: 1pc
Clamping shank: MK1(morse 1)
blade:
a) 0 Â °(cat. no. 02-303), suitable for brass, bronze, cast iron, heat-resistant steel
b) 14 Â °(cat. no. No. 02-305), suitable for special bronze, plexiglass
c) 20 Â °(cat. No. 02-308), suitable for ordinary steel, copper, plastics, stainless steel
d) 20 Â ° TiN(cat. no. 2T305B), suitable for ordinary steel, stainless steel, inconel, titanium
e) 25 Â ° Â °(cat. no. 02-307), suitable for aluminum, iron, sheets
Dimensions of the needle:
Total length: 80mm
Diameter of the front Parts: 18mm
Diameter of aluminum nuts: 26mm
Shank length: 27mm
How to insert the blade and adjust the height of the needles / chamfering
1) Loosen both worms on the body of the drawbar and remove the aluminum and black nuts. Be careful that you do not lose the spring, it is free.
2) Insert the body into the body, secure it with two worms and reassemble the whole needle. Tighten the worms on the body and loosen them by about a quarter to a half turn to maintain the function of the spring.
3) Adjust the chamfer height by tightening the aluminum nut - tightening = less chamfering, loosening = more chamfering.
4) Make sure that the runner is not drowned in the body of the needle, if so, rearrange the aluminum nut and check so that the runner protrudes.
5) Always have the black counter mother tightened to the aluminum mother.
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Široký sortiment
Dobrá cena
Rychlá doprava
"DOPORUČUJI!"
Kvalitni zbozi
Rychle dodani
Poradenstvi
Dobre ceny
"Nakupovali jsme jiz nekolikrat, vzdy maximalni spokojenost s kvalitou, komunikaci obchodu a peclive zabalenym zbozim.
Jsme verni zakaznici, v obchode budeme nakupovat i nadale."
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!