Lever gauge - pupitas, alarm clock 40mm, KMITEX

Manetized Dial Stand with Central Lock / Central Lock The arms are made of aluminum (ALU), making them lighter. One-screw central tightening. Clamping force of magnet 784N The end of the arm is fine, this is set separately. The magnetic base is from the bottom of the prism. Base Dimensions: 50x60mm Max. arm length from base to tailgate: 275mm

Hydraulic stand for indicators with magnetic base and central locking / central locking Distance from table top to clamping eye for indicator: 420mm Magnetic compression: 784N Magnet dimensions: 50x60mm Centrally tighten one screw. At the end of the upper arm is a fine building that is sewn separately. Thanks to the hydraulic design, the stand is more accurate and sturdy. The magnetic base is from the bottom of the prism. Hydraulic stands should NOT be stored tight (eg overnight). The stand should not be tightened for more than 5 hours.

Articulated manege stand for dial gauges. Very flexible because it is composed of individual articles. Strands in the middle of the strands can be variously styled to achieve different positions of the shoulders. Length: 360mm Magnetic clamping force 294 N Magnetic base has a bottom and two sides of the prism. Base dimensions: 54x40x50mm

Indicator holder, magnetic stand for indicators, deflection meters with central locking / central locking For indicators with clamping diameter: 8mm (can be clamped behind a prism) Length of arms: 335mm (arms 160mm and 175mm) Pressure 588N Dimensions of the base: 63x50x55 With this type of stand, you lock all the joints with one screw, delicate construction The indicator can be attached to this stand by its cylindrical part (diameter 8mm), but also by the lug, if the indicator is equipped with it.

Indicator holder, magnetic stand for indicators, gauges Pressure: 80 kg (800N) Base dimensions: 63x50x55 Shoulder length: 175mm fixed and 150mm adjustable Classic stand for indicators, screws, soft construction In this stand the indicator can be clamped behind its cylindrical part (diameter 8mm), but also behind the tab if the indicator is equipped with it. Dial indicators / indicators are not included. You can find them in the "Gauges", "Indicators - Gauges" section: http://www.kovonastroje.cz/Meridla/Indikatory-uchylkomery/