Grooving ADKT-I-L holder for DGN and GRIP inserts , AKKO
12x12mm / DGN 2 |
On request
|
105,67 € with VAT |
16x16mm / DGN 2 |
On request
|
106,95 € with VAT |
20x20mm / DGN 2 |
In stock
(2x)
|
108,22 € with VAT |
25x25mm / DGN 2 |
On request
|
109,49 € with VAT |
12x12mm / DGN 3 |
In stock
(1x)
|
105,67 € with VAT |
16x16mm / DGN 3 |
On request
|
106,95 € with VAT |
20x20mm / DGN 3 |
On request
|
108,22 € with VAT |
25x25mm / DGN 3 |
On request
|
109,49 € with VAT |
20x20mm / DGN 4 & GRIP 4 |
On request
|
108,22 € with VAT |
25x25mm / DGN 4 & GRIP 4 |
On request
|
109,49 € with VAT |
20x20mm / DGN 5 & GRIP 5 |
On request
|
108,22 € with VAT |
25x25mm / DGN 5 & GRIP 5 |
On request
|
109,49 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- AKKO
- Warranty:
- 24 months
Product information
Knife for external turning
Clamping dimensions: according to the selected variant
For plates: according to the selected variant
Other dimensions: see the attached catalog sheet
Type VBD: Iscar DGN and GRIP - double-sided
The product comes with a key for changing the blade.
Variants
Accessories
-
Interchangeable insert DGN 2202C IC908, Iscar
Turning insert, Turntable cutting insert - DGN2202C IC908, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Typical conditions - see enclosed photo Type C: For cutting and grooving bars, hard materials. Ref. No. 6002960
In stock22,78 € with VAT -
Interchangeable insert DGN 2202J IC908, Iscar
Turning insert, Turntable cutting insert DGN2202J IC908, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Tough conditions - see enclosed photo Type J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. No. 6002961
In stock22,78 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!